GLS85LP0512P / 1002P / 1004P / 1008P
Industrial Grade PATA NANDrive™
Factsheet 03.100
June 2019
Features
• Industry Standard ATA / IDE Bus Interface
• Expanded Data Protection
–
–
–
–
–
Host Interface: 16-bit access
–
–
–
WP#/PD# pin configurable by firmware for
prevention of data overwrites
Data security through user-selectable
protection zones
Supports 48-bit address feature set
Supports up to PIO Mode-6 1)
Supports up to Multi-Word DMA Mode-4 2)
Supports up to Ultra DMA Mode-6
Security Erase feature
• 20-Byte Unique ID for Enhanced Security
• Performance
–
Factory pre-programmed 10-Byte unique ID
–
Sequential data read: Up to 50 MByte/sec*
–
User-programmable 10-Byte ID
–
Sequential data write: Up to 35 MByte/sec*
* measured using 128 Kbyte transfer size
• Integrated Voltage Detector
• Power Management
–
Prevents inadvertent Write operations due to
unexpected power-down or brownout
–
3.3V power supply
–
Immediate disabling of unused circuitry
without host intervention
Zero wake-up latency
• NAND Configuration
–
1 bit per cell (SLC)
–
–
Excellent endurance and data retention
• Power Specification
• Operating Temperature Range
Industrial: -40°C to 85°C
• 91-ball BGA and LBGA Packages
–
Active mode
–
8GB: 100mA (typical)
4GB: 80mA (typical)
512MB/2GB: 60mA (typical)
Sleep mode: 500µA (typical)
–
2GB, 4GB, 8GB:14.0mm x 24.0mm x 1.90mm,
1.0mm ball pitch, FTE
–
–
512MB: 12.0mm x 24.0mm x 1.40mm,
1.0mm ball pitch, LBTE
• Supports SMART Commands
• Robust Built-in ECC
• All Devices are RoHS Compliant
Product Description
The GLS85LP0512P / 1002P / 1004P / 1008P
Industrial Grade PATA NANDrive™ devices (referred
to as “PATA NANDrive” in this factsheet) are fully
integrated, embedded solid state drives. They
combine an integrated ATA controller and 512 MBytes,
2 GBytes, 4 GBytes or 8 GBytes of NAND flash
memory in a multi-chip package. These products are
ideal for embedded and portable applications that
require smaller form factor and more reliable data
storage.
The integrated NAND flash controller with built-in
advanced
NAND
management
firmware
communicates with the host through the standard ATA
protocol. It does not require any additional or
proprietary software such as the Flash File System
(FFS) and Memory Technology Driver (MTD).
PATA NANDrive provides a WP#/PD# pin to protect
critical information stored in the flash media from
unauthorized overwrites. PATA NANDrive is pre-
programmed with a 10-Byte unique serial ID and has
the option of programming an additional 10-Byte serial
ID for even greater system security.
ATA-based solid state mass storage technology is
widely used in GPS and telematics, in-vehicle
infotainment, portable and industrial computers,
handheld data collection scanners, point-of-sale
terminals, networking and telecommunications
equipment, robotics, audio and video recorders,
monitoring devices and set-top boxes.
PATA NANDrive’s advanced NAND management
technology enhances data security, improves
endurance and accurately predicts the remaining
lifespan of the NAND flash devices. This innovative
technology combines robust error correction
capabilities with advanced wear-leveling algorithms
and bad block management to significantly extend the
life of the product.
PATA NANDrive supports standard ATA/IDE protocol
with up to PIO Mode-61), Multi-Word DMA Mode-42)
and Ultra DMA Mode-6 interface. The PATA
NANDrive device provides complete IDE hard disk
drive functionality and compatibility in a 14mm x
24mm BGA package or a 12mm x 24mm LBGA
package for easy, space saving mounting to a system
motherboard. These products surpass traditional
storage in their small size, security, reliability,
ruggedness and low power consumption.
1) PATA NANDrive is capable of supporting PIO Mode-6,
but Identify-Drive information report will show PIO Mode-4
2) PATA NANDrive is capable of supporting Multi-Word
DMA Mode-4, but Identify-Drive information report will
show MWDMA Mode-2
These specifications are subject to change without notice.
© 2019 Greenliant
06/28/2019
S71431-F
1