GLS85LS1008C / 1016C / 1032C / 1064C / 1128C
Industrial Temp SATA NANDrive™ MX Series
Preliminary Factsheet 02.100
January 2020
Features
• Industry Standard SATA Host Interface
• Expanded Data Protection
–
–
–
–
–
SATA 1.5Gb/s, 3Gb/s and 6Gb/s
SATA Revision 3.2
ATA/ATAPI-8 compliant
Supports 48-bit address feature set
Native Command Queuing (NCQ)
up to 32 commands
–
Added data security through user-selectable
protection zones
–
Secure Erase (data sanitization)
• 20-Byte Serial Number
–
Factory pre-programmed 10-Byte unique ID
–
User-programmable 10-Byte ID
• Performance
• Supports SMART and TRIM Commands
• Robust Built-in ECC
• Thermal Throttling
–
Sequential data read: Up to 410 MByte/sec
–
Sequential data write: Up to 115 MByte/sec
(128KB transfer size tested in VDBench on Linux)
• NAND Configuration
• Power Management
–
2 bits per cell (3D MLC NAND)
–
–
–
3.3V and 1.0V power supply
Host initialized power management (HIPM)
Device initialized power management (DIPM)
• Endurance
–
Program/Erase (P/E) Cycles: 5K
• Operating Temperature Range
• Power Specifications
–
Industrial: -40°C to 85°C
–
Active mode:
• BGA package
128GB: Up to 2860mW
64GB: Up to 1980mW
32GB: Up to 1540mW
16GB: Up to 1200mW
8GB: Up to 1200mW
Idle / Standby mode: <355mW
DevSleep mode: <70mW
–
–
14.0 mm x 24.0 mm x 1.40 mm, 145-ball,
1.0 mm ball pitch, LBJE (8GB, 16GB, 32GB,
64GB)
14.0 mm x 24.0 mm x 1.95 mm, 145-ball,
1.0 mm ball pitch, FZJE (128GB)
–
–
• All Devices are RoHS Compliant
Product Description
The GLS85LS1008C / 1016C / 1032C / 1064C /
1128C Industrial Temperature SATA NANDrive™
devices (referred to as “SATA NANDrive” in this
factsheet) are fully integrated solid state drives. They
combine an advanced Greenliant NAND controller
and 8, 16, 32, 64 or 128 GBytes of NAND flash in a
multi-chip package. These products are ideal for
embedded and portable applications that require small
form factor and reliable data storage.
The integrated NAND flash controller with built-in
advanced
NAND
management
firmware
communicates with the host through the standard
SATA protocol. It does not require any additional or
proprietary software such as the Flash File System
(FFS) and Memory Technology Driver (MTD).
SATA NANDrive is pre-programmed with a 10-Byte
unique serial ID and has the option of programming
an additional 10-Byte serial ID for even greater
system security.
Serial ATA (SATA)-interface solid state mass storage
technology is widely used in industrial PCs, single
board computers, servers, networking appliances,
HMI and digital signage displays, test and
SATA NANDrive’s advanced NAND management
technology enhances data reliability and security,
improves endurance and accurately estimates the
remaining life of the NAND flash devices. This
innovative technology combines robust NAND
controller hardware error correction capabilities with
advanced wear-leveling algorithms and bad block
management to significantly extend the life of the
product.
measurement
instrumentation,
multi-functional
printers, robotics, video equipment and security
systems.
SATA NANDrive is a single device, solid state drive
(SSD) that provides the functionality and compatibility
of a complete SATA hard disk drive (HDD) in a 14 mm
x 24 mm BGA package for easy, space saving
mounting to a system motherboard. These products
surpass traditional storage in their small size, security,
reliability, ruggedness and low power consumption.
SATA NANDrive devices are offered in a 145-ball
BGA, 1 mm ball pitch package.
These specifications are subject to change without notice.
© 2020 Greenliant
01/03/2020
S71451-01
1
GLS FS0019 Rev. 00