Datasheet > G3J-205BLDC12-24

G3J-205BLDC12-24

更新时间： 2025-07-20 19:10:35

品牌	Logo	应用领域
欧姆龙 - OMRON		/
页数	文件大小	规格书
12页	594K
描述
负载电流(mA):4.8 A;触头类型:SPST-NO（1 Form A）;输出类型:AC;

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

G3J-205BLDC12-24 数据手册

Inductive Noise

ON/OFF Frequency

Do not wire power lines alongside the input lines. Inductive noise

may cause the SSR to malfunction. If inductive noise is imposed on

the input terminals of the SSR, use the following cables according to

the type of inductive noise, and reduce the noise level to less than

the must release voltage of the SSR.

The ON/OFF frequency should be set to 10 Hz maximum for AC load

switching and 100 Hz maximum for DC load switching. If switching

occurs at frequencies exceeding these values, the SSR output will

not be able to follow-up.

Input Impedance

Twisted-pair wire: For electromagnetic noise

Shielded cable: For static noise

In SSRs which have wide input voltages (such as G3F and G3H), the

input impedance varies according to the input voltage and changes

in the input current. For semiconductor-driven SSRs, changes in volt-

age can cause malfunction of the semiconductor, so be sure to check

the actual device before usage. See the following examples.

A filter consisting of a combination of capacitor and resistor will effec-

tively reduce noise generated from high-frequency equipment.

Applicable Input Impedance for a Photocoupler- type SSR without

Indicators (Example) G3F, G3H (Without Indicators)

Input Current

Filter

High-frequency

device

Input Impedance

Input voltage (V)

Applicable Input Impedance for a Photocoupler- type SSR with Indicators

(Example) G3B, G3F, G3H (With Indicators)

Note: R: 20 to 100 Ω

C: 0.01 to 1 µF

Input Conditions

Input Voltage Ripples

When there is a ripple in the input voltage, set the input voltage so

that the peak voltage is lower than the maximum operating voltage

and the root voltage is above the minimum operating voltage.

Input Current

Peak voltage

Input Impedance

Root voltage

0 V

Input voltage (V)

Applicable Input Impedance (Example) G3CN

Countermeasures for Leakage Current

When the SSR is powered by transistor output, the must release volt-

age may be insufficient due to leakage current while power is OFF.

To counteract this, connect bleeder resistance as shown in the dia-

gram below and set the bleeder resistance so that VR is 0.5 V or

less.

Input Current

Input Impedance

Bleeder resistance

Input voltage (V)

830

Solid State Relays Technical Information

1 234 5 6 7...12

中文翻译

下载PDF

与G3J-205BLDC12-24相关器件

型号	品牌	获取价格	描述	数据表
G3J-211BL-2AC100-240	OMRON	获取价格	负载电流(mA):11.1 A;触头类型:SPST-NO（1 Form A）;输出类型:A
G3J-211BLDC12-24	OMRON	获取价格	负载电流(mA):11.1 A;触头类型:SPST-NO（1 Form A）;输出类型:A
G3J-S205BL	OMRON	获取价格	Soft-start Solid State Contactors
G3J-S211BL	OMRON	获取价格	Soft-start Solid State Contactors
G3J-S403BL	OMRON	获取价格	Soft-start Solid State Contactors
G3J-S405BL	OMRON	获取价格	Soft-start Solid State Contactors
G3J-T	OMRON	获取价格	Soft-start/stop Function Starts and Stops Three-phase Motors Smoothly and Economically
G3J-T-C	OMRON	获取价格	Solid State Contactor for 3-phase Motors with Built-in Soft Start/Stop and Monitor Output
G3J-T205BL	OMRON	获取价格	Soft-start/stop Function Starts and Stops Three-phase Motors Smoothly and Economically
G3J-T205BL-C	OMRON	获取价格	Solid State Contactor for 3-phase Motors with Built-in Soft Start/Stop and Monitor Output

产品中心

服务支持

精选活动

关于我们

帮助中心

G3J-205BLDC12-24

G3J-205BLDC12-24 数据手册

与G3J-205BLDC12-24相关器件

与G3J-205BLDC12-24相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

G3J-205BLDC12-24

G3J-205BLDC12-24 数据手册

与G3J-205BLDC12-24相关器件

与G3J-205BLDC12-24相关文章

您还可以找

您在本页遇到什么问题？