ISSUED DATE :2005/11/24
REVISED DATE :
GTM
CORPORATION
G276P
C o m p l e m e nta r y O u t p u t Ha ll E f f e ct L at c h ed Si n k D r i ve r IC
Description
The G276P is an integrated Hall sensors with output drivers designed for electronic commutation of brushless DC motor
applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the
Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and complementary open-collector
drivers for sinking large current loads. An internal bandgap regulator is used to provide temperature compensated supply
voltage for internal circuits and allows a wide operating supply range.
If a magnetic flux density larger than threshold Bop, DO is turned on (low) and DOB is turned off (high). The output state is
held until a magnetic flux density reversal falls below Brp causing DO to be turned off and DOB turned on.
G276P is rated for operation over temperature range from -20к to 85к and voltage range from 3.5V to 20V. The devices
are available in low cost die forms or rugged 4 pin SIP packages.
Features
*On-chip Hall sensor IC with two different sensitivity and hysteresis settings for G276P
*Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range.
*High output sinking capability up to 300mA for driving large load.
*Lower current change rate reduces the peak output voltages during switching.
*Build in protection diode for chip reverse power connecting.
*Package: SIP-4L.
Application
1)Brushless DC Motor
2)Brushless DC Fan
3)Revolution Counting
4)Speed Measurement
Package Dimensions
Millimeter
Min. Max.
Millimeter
REF.
REF.
Min.
Max.
A
A1
b
1.295 1.803
0.610
D
E
L
5.105
3.531
14.00
5.359
3.785
16.00
0.330 0.432
0.406 0.508
b1
e
1.27REF
G276P
Page: 1/5