FDA2100LV
2 x 180 W / 1 x 300 W PWM digital input power amplifier
with built-in diagnostics features and step-up driver
Data brief - production data
Description
The FDA2100LV is a new BCD technology dual
bridge class D amplifier, specially intended for car
*$*36ꢀꢁꢂꢃꢁ
radio applications.
TQFP64 (exposed pad up)
Thanks to the BCD6-SOI (Silicon On Insulation)
technology it is possible to integrate a high
performance D/A converter together with powerful
MOSFET output amplifier working in class D, to
get outstanding efficiency with respect to the
standard class AB.
Features
Integrated 105 dB D/A conversion
2
I S & TDM digital input (3.3/1.8 V)
Input sampling frequency: 44.1kHz, 48 kHz,
The D/A conversion on board allows the
performance to reach an outstanding 110 dB S/N
ratio with 105 dB of dynamic range. The feedback
loop includes the output L-C low-pass filter,
allowing superior frequency response linearity
and lower distortion independently of the inductor
and capacitor quality.
96 kHz, 192 kHz
Step-up driver included
EMI control for FM/AM compatibility
Dithering possibility
Capable to operate down to 6 V (e.g."start-stop")
6 V - 35 V operating range (R = 8 Ω)
L
A full diagnostics array communicates the status
of each speaker through the I C bus. The
Low component count output low-pass filter
Output low-pass filter included in the feedback
Low radiation function (LRF)
2
possibility to control the device by means of the
2
I C bus makes FDA2100LV very flexible.
High output power capability
Thanks to the solutions implemented to solve the
EMI problems, the device can be used in the
standard single DIN car-radio box together with
the tuner.
– 2 x 80 W/4 Ω @ 25 V, 1 kHz, 10 % THD
– 2 x 120 W/4 Ω @ 30 V, 1 kHz, 10 % THD
– 1 x 150 W/2 Ω @ 25 V, 1 kHz, 10 % THD
2
Full I C bus driving (3.3/1.8 V):
A built-in step-up driver allows up to 150 W output
power with the standard 14 V supply voltage.
2
– I C bus digital diagnostics (including DC
and AC load detection); AC and DC
loudspeaker diagnostic
The FDA2100LV is moreover compliant to the
most recent OEM specifications for low voltage
operation (so called 'start-stop' battery profile
during engine stop), helping car manufacturers to
reduce the overall emissions and thus
Very flexible fault detection through integrated
diagnostic
Protected against several kinds of
misconnections
contributing to environment protection.
Offset detector (play or mute mode)
Two independent short circuit protections
Clipping detector
Table 1. Device summary
Order code
Package
Packing
C-MOS compatible enable pin (3.3/5 V)
ESD protection
FDA2100LV
Tray
TQFP64 (e.p.u.)
FDA2100LV-T
Tape & reel
Package: TQFP64 exposed pad up
October 2013
DocID025342 Rev 1
1/9
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
www.st.com