FAN54040 — FAN54047
USB-OTG, 1.55 A, Li-Ion Switching Charger with Power
Path and 2.3 A Production Test Support
Description
Features
The FAN5404X family includes I2C controlled 1.55 A USB-
.
Fully Integrated, High-Efficiency Charger for Single-Cell
Li-Ion and Li-Polymer Battery Packs
compliant sw itch-mode chargers w ith pow er path operation
and USB OTG boost operation. Integrated w ith the charger,
the IC supports production test mode, w hich provides 4.2 V
at up to 2.3 A to the system.
.
Pow er Path Circuit Ensures Fast System Startup w ith a
Dead Battery w hen VBUS is Connected
.
.
1.55 A Maximum Charge Current
Float Voltage Accuracy:
To facilitate fast system startup, the IC includes a pow er
path circuit, w hich disconnects the battery from the system
rail, ensuring that the system can pow er up quickly follow ing
a VBUS connection. The pow er path circuit ensures that the
system rail stays up w hen the charger is plugged in, even if
the battery is dead or shorted.
-
-
±0.5% at 25°C
±1% from 0 to 125°C
.
.
±5% Input and Charge Current Regulation Accuracy
Temperature-Sense Input Prevents Auto-Charging for
JEITA Compliance
The charging parameters and operating modes are
programmable through an I2C Interface that operates up to
3.4 Mbps. The charger and boost regulator circuits sw itch at
3 MHz to minimize the size of external passive components.
.
.
.
.
.
.
Thermal Regulation and Shutdow n
4.2 V at 2.3 A Production Test Mode
5 V, 500 mA Boost Mode for USB OTG
28 V Absolute Maximum Input Voltage
6 V Maximum Input Operating Voltage
The FAN5404X provides battery charging in three phases:
conditioning, constant current, and constant voltage. The
integrated circuit automatically restarts the charge cycle
w hen the battery falls below a voltage threshold. If the input
source is removed, the IC enters a high-impedance mode
blocking battery current from leaking to the input. Charge
status is reported back to the host through the I2C port.
Programmable through High-Speed I2C Interface
(3.4 Mb/s) w ith Fast Mode Plus Compatibility
-
-
-
-
Input Current
Fast-Charge / Termination Current
Float Voltage
Dynamic input voltage control prevents a w eak adapter’s
voltage from collapsing, ensuring charging capability from
such adapters.
Termination Enable
The FAN5404X is available in a 25-bump, 0.4 mm pitch,
WLCSP package.
.
3 MHz Synchronous Buck PWM Controller w ith
Wide Duty Cycle Range
.
.
.
.
Small Footprint 1 µH External Inductor
Safety Timer w ith Reset Control
VBUS
CBUS
L1
SW
CSYS
SYS
PGND
Dynamic Input Voltage Control
SYSTEM
LOAD
Q5
PMID
GATE
Very Low Battery Current w hen Charger Inactive
CMID
External
PMOS
Applications
FAN5404X
POK_B
ILIM
VBAT
.
.
.
Cell Phones, Smart Phones, PDAs
CBAT
SDA
SCL
NTC
REF
Tablet, Portable Media Players
Gaming Device, Digital Cameras
RREF
BATTERY
DIS
CREF
+
STAT
AGND
T
Figure 1. Typical Application
All trademarks are the property of their respective owners.
© 2012 Semiconductor Components Industries, LLC.
December-2017, Rev. 2
Publication Order Number:
FAN54041/D