July 2013
FAN54040 — FAN54047
USB-OTG, 1.55 A, Li-Ion Switching Charger with Power
Path and 2.3 A Production Test Support
Description
Features
The FAN5404X family includes I2C controlled 1.55 A USB-
.
Fully Integrated, High-Efficiency Charger for Single-Cell
Li-Ion and Li-Polymer Battery Packs
compliant switch-mode chargers with power path operation
and USB OTG boost operation. Integrated with the charger,
the IC supports production test mode, which provides 4.2 V
at up to 2.3 A to the system.
.
Power Path Circuit Ensures Fast System Startup with a
Dead Battery when VBUS is Connected
.
.
1.55 A Maximum Charge Current
Float Voltage Accuracy:
To facilitate fast system startup, the IC includes a power
path circuit, which disconnects the battery from the system
rail, ensuring that the system can power up quickly following
a VBUS connection. The power path circuit ensures that the
system rail stays up when the charger is plugged in, even if
the battery is dead or shorted.
0.5% at 25°C
1% from 0 to 125°C
.
.
5% Input and Charge Current Regulation Accuracy
Temperature-Sense Input Prevents Auto-Charging for
JEITA Compliance
The charging parameters and operating modes are
programmable through an I2C Interface that operates up to
3.4 Mbps. The charger and boost regulator circuits switch at
3 MHz to minimize the size of external passive components.
.
.
.
.
.
.
Thermal Regulation and Shutdown
4.2 V at 2.3 A Production Test Mode
5 V, 500 mA Boost Mode for USB OTG
28 V Absolute Maximum Input Voltage
6 V Maximum Input Operating Voltage
The FAN5404X provides battery charging in three phases:
conditioning, constant current, and constant voltage. The
integrated circuit automatically restarts the charge cycle
when the battery falls below a voltage threshold. If the input
source is removed, the IC enters a high-impedance mode
blocking battery current from leaking to the input. Charge
status is reported back to the host through the I2C port.
Programmable through High-Speed I2C Interface
(3.4 Mb/s) with Fast Mode Plus Compatibility
Input Current
Fast-Charge / Termination Current
Float Voltage
Dynamic input voltage control prevents a weak adapter’s
voltage from collapsing, ensuring charging capability from
such adapters.
Termination Enable
The FAN5404X is available in a 25-bump, 0.4 mm pitch,
WLCSP package.
.
3 MHz Synchronous Buck PWM Controller with
Wide Duty Cycle Range
.
.
.
.
Small Footprint 1 H External Inductor
Safety Timer with Reset Control
VBUS
CBUS
PGND
L1
SW
CSYS
SYS
Dynamic Input Voltage Control
SYSTEM
LOAD
Q5
PMID
GATE
Very Low Battery Current when Charger Inactive
CMID
External
PMOS
Applications
FAN5404X
POK_B
ILIM
VBAT
CBAT
.
.
.
Cell Phones, Smart Phones, PDAs
Tablet, Portable Media Players
Gaming Device, Digital Cameras
SDA
SCL
NTC
REF
RREF
BATTERY
DIS
CREF
+
STAT
AGND
T
Figure 1. Typical Application
All trademarks are the property of their respective owners.
© 2012 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN54040 – FAN54047 • Rev. 1.0.2