Datasheet > ESJA08-04A

ESJA08-04A

更新时间： 2022-07-09 10:27:49

品牌	Logo	应用领域
广濑 - HRS		/
页数	文件大小	规格书
7页	260K
描述
5.0mA 4.0kV 50nS Ultra-Fast Recovery High Voltage Silicon Rectifier Diode

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

ESJA08-04A 数据手册

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Interface Connectors for Factory Automation Network

HR31 Series

Complies with Device Net requirements

Comparison of plug heights (actual size)

ꢀHirose HR31

ꢀOther manufacturer’s product

ꢀꢀFeatures

1. Device-Net Compliant

Conforms to requirements of Factory Automation Network Device-Net standards.

Hirose products are distinct from products of made others, as described below.

Feature

Made by others

Hirose HR31

Reduced number of termination Crimped to commercially available cap connectors, Crimped and connected to terminal then fastened

operations

inserted into housing and fastened by screw.

simply by inserting into housing.

Plug height is 10.2 mm, allowing use of less space

when mounting several connectors

High density mounting

Plug height : 15 mm

Prevention of connection errors

Contact positions not identified.

Permanently identified contact positions

Number of required operations to

secure receptacle assembly to the

board

Connectors are attached by screws from the No need for screws, built-in locking pin secures

opposite side.

connector to the board

2 Locking features

Total space occupied by mated assemblies

The connectors can be supplied with either of the following

locking features:

-Screw lock, using attached screws.

-Snap lock, using built-in feature with a definite click-sensation.

With screw lock

Without screw lock

3. Commercially available tools may be used

Use crimp tools conforming to JIS C 9711 standards.

Terminated contacts can be removed using 1 mm dia.

steel pin. and re-inserted.

4. Prevention of deformation of the contacts

When fully inserted, the plug contacts are fully protected by

the walls of the insulator body eliminating a risk of

accidental damage.

ꢀꢀApplications

Power units and communications units of factory automation

related devices

2006.8

12 3 4 5 6 7

中文翻译

下载PDF

与ESJA08-04A相关器件

型号	品牌	获取价格	描述	数据表
ESJA08-06	HVGT	获取价格	6.0kV 5mA HIGH VOLTAGE DIODES
ESJA08-08	HVGT	获取价格	8.0kV 5mA HIGH VOLTAGE DIODES
ESJA08-08	HVGT	获取价格	8.0kV 5mA HIGH VOLTAGE DIODES
ESJA08-08	FUJI	获取价格	HIGH VOLTAGE DIODE
ESJA08-08A	FUJI	获取价格	Rectifier Diode, 1 Element, 0.005A, 8000V V(RRM), Silicon
ESJA08-10	HVGT	获取价格	10kV 5mA HIGH VOLTAGE DIODES
ESJA08-10	HVGT	获取价格	10kV 5mA HIGH VOLTAGE DIODES
ESJA08-10	SUNMATE	获取价格	High voltage diode High voltage diode 10kv-12kv
ESJA08-10A	CTS	获取价格	5.0mA 10kV 50nS Ultra-Fast Recovery High Voltage Silicon Rectifier Diode
ESJA08-12	HVGT	获取价格	12kV 5mA HIGH VOLTAGE DIODES