EMH-54/3-Q48N-C Series
www.murata-ps.com
Isolated, 54Vout, 3A, Ethernet Power
Half-Brick DC/DC Converters
ORDERING GUIDE SUMMARY
Model
Vout Range
54V
Iout Range
0.2-3A
Vin Range
18-72V
Ripple/Noise
250mVp-p
Efficiency
91.5%
EMH-54/3-Q48
INPUT CHARACTERISTICS
Parameter
Typ. @ 25°C, full load
Notes
Voltage Range
18-72 Volts
3.67 Amps
17.5 Volts
17 Volts
48V nominal
VIN = 48V
Input Current, full power
Turn On/start-up threshold
Undervoltage Shutdown
No load Input Current
OUTPUT CHARACTERISTICS
Parameter
Typical units
40mA
VIN = 48V
Typ. @ 25°C, full load
54 Volts
Notes
2%
Voltage
Current
0.2 to 3 Amps
162 Watts
250mVp-p
0.125%/ 0.2%
4 Amps
0.2A min load required
Power Output
Ripple & Noise
20MHz bandwidth
Line and Load Regulation
Overcurrent Protection
Overtemperature Protection
Efficiency (minimum)
Efficiency (typical)
GENERAL SPECIFICATIONS
Parameter
With hiccup auto-restart
+135°C
FEATURES
ꢀ
Industry-Standard “Half-Brick” footprint
89.5%
91.5%
ꢀ
162W output power @ 24-72Vin
ꢀ
Up to 91.5% Efficiency at 54V output (typical)
Typ. @ 25°C, full load
300μsec
Notes
Dynamic Load Response
Operating Temperature Range
50-75-50% step to 1 of final value
With baseplate, see derating curve
ꢀ
On/Off Control (Negative logic)
–40 to +85°C
ꢀ
Monotonic startup into pre-bias output conditions
Absolute Operating Temperature
Range
ꢀ
Over-current, Output & Over-temperature
protection
–40 to +105°C
Measured at Thermistor, see derating
UL 60950-1, 2nd edition
ꢀ
Low output ripple and noise
Safety Features
CSA-C22.2 No.60950-1 and
IEC/EN60950-1 (pending)
ꢀ
Strong thermal derating characteristics
ꢀ
Operational Temperature Range –40°C to +85°C
with baseplate
PHYSICAL SPECIFICATIONS
Parameter
Inches
Millimeters
ꢀ
2250V I/O isolation
Open frame (no baseplate)
With baseplate
2.4 x 2.3 x 0.43
2.4 X 2.3 X 0.5
61 x 58.4 x 10.92
61.0 x 58.4 x 12.7
ꢀ
Output short-circuit protection (hiccup technique)
PRODUCT OVERVIEW
The EMH-54/3-Q48N-C module offers 54V output at 3
amps in a Half Brick footprint DC/DC power converter.
These compact modules measure 2.4˝ x 2.3˝ x 0.5˝
(61 x 58.4 x 12.7 mm) with baseplate and offer the
industry-standard Half-Brick footprint. The product is
designed to fully comply with RoHS-6 directive.
The modules offer wide range input voltage of
18-72V. The EMH topology offers high efficiency up
to 91.5%, good regulation, low ripple/noise, and a
fast dynamic load response. The module sup-
plies up to 162 Watts of power and isolation rated
at 2250V for basic insulation. EMH models are
designed for demanding telecom, POE (power over
Ethernet), datacom, and networking applications.
EMHs feature input filters, input under voltage,
output current limiting, short-circuit protection, and
thermal shutdown.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_EMH-54/3-Q48N-C.A01 Page 1 of 15