EL6833
®
Data Sheet
July 15, 2004
FN7350.1
Dual 4-Channel Driver with Oscillator &
LVDS
Features
• Two channels for CD or DVD
The EL6833 is a high performance,
dual output, laser driver for writeable
• Voltage-controlled output current source requiring one
external set resistor per channel
‘super-combo’ CD - DVD drives. The
ENA pin enables the chip, while the SEL1 pin selects the
• Rise time = 0.8ns
• Fall time = 0.8ns
I
pin. Various waveforms can be generated where the
OUT
amplitude is determined by the currents flowing into I
,
• DVD - Channel 2 to 240mA max
• DVD - Channel 3 to 170mA max
• DVD - Channel 4 to 100mA max
• CD - Channel 2 to 350mA max
• CD - Channel 3 to 250mA max
INR
, I , and I . The timing is determined by the signals
I
IN2 IN3
IN4
at WEN2-WEN2B, WEN3-WEN3B, and WEN4-WEN4B. The
oscillator is enabled when OSEN-OSENB is high. The
amplified I
current of the selected channel is enabled
INR
when the ENA pin is high. The total output current is the sum
of the read current, the enabled write currents, and the
oscillator current when enabled.
• On chip oscillator with frequency and amplitude control by
use of external resistors to ground
Usually a voltage DAC will drive a resistor that is in series
• Oscillator frequency to 600MHz
with the I
, I , I
and I
input. The resistor allows the
INR IN2 IN3
IN4
• Oscillator amplitude to 100mA
• Single +5V supply (±10%)
• Chip ENAs for power savings
• External LVDS termination
P-P
user to optimize the current gain for each channel.
Output write current pulses are enabled when a high is
applied to the WEN2-WEN2B, WEN3-WEN3B, or WEN-
WEN4B pin. The write current will flow to the selected
output. When SEL1 is high I
is selected. WENRB
OUT1
enables read and oscillator current when low.
• Pb-free available
Applications
• Super combo drives
The R oscillators frequency is determined by R
or
F
FREQ1
.
R
, and its amplitude by R
or R
FREQ2
AMP1
AMP2
Ordering Information
TAPE &
REEL
PART NUMBER
EL6833CL
PACKAGE
32-Pin QFN
32-Pin QFN
32-Pin QFN
PKG. DWG. #
MDP0046
MDP0046
MDP0046
MDP0046
-
7”
13”
-
EL6833CL-T7
EL6833CL-T13
Get FULL DATASHEET
EL6833CLZ
(Note)
32-Pin QFN
(Pb-Free)
EL6833CLZ-T7
(Note)
32-Pin QFN
(Pb-Free)
7”
MDP0046
MDP0046
EL6833CLZ-T13
(Note)
32-Pin QFN
(Pb-Free)
13”
NOTE: Intersil Lead-Free products employ special lead-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which is compatible with both SnPb
and lead-free soldering operations. Intersil Lead-Free products are
MSL classified at lead-free peak reflow temperatures that meet or
exceed the lead-free requirements of IPC/JEDEC J Std-020B.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.