EL6835
®
Data Sheet
July 1, 2003
FN7231
PRELIMINARY
Dual 4-Channel Driver with Oscillator &
LVDS
Features
• Two channels for CD or DVD
The EL6835 is a high performance,
dual output, laser driver for writeable
• Voltage-controlled output current source requiring one
external set resistor per channel
‘super-combo’ CD - DVD drives. The
ENA pin enables the chip, while the SEL1 pin selects the
• Rise time = 0.8ns
I
pin. Various waveforms can be generated where the
• Fall time = 0.8ns
OUT
amplitude is determined by the currents flowing into I
,
INR
• Channel 2 to 250mA max
• Channel 3 to 150mA max
• Channel 4 to 100mA max
• External 100Ω LVDS termination
I
, I , and I . The timing is determined by the signals
IN2 IN3 IN4
at WEN2-WEN2B, WEN3-WEN3B, and WEN4-WEN4B. The
oscillator is enabled when OSEN is high. The amplified I
INR
current of the selected channel is enabled when the ENA pin
is high. The total output current is the sum of the read
current, the enabled write currents, and the oscillator current
when enabled.
• On chip oscillator with frequency and amplitude control by
use of external resistors to ground
Usually a voltage DAC will drive a resistor that is in series
• Oscillator frequency to 600MHz
with the I
, I , I , and I
input. The resistor allows
INR IN2 IN3
IN4
• Oscillator amplitude to 100mA
• Single +5V supply (±10%)
• Chip ENAs for power savings
P-P
the user to optimize the current gain for each channel.
Output write current pulses are enabled when a high is
applied to the WEN2-WEN2B, WEN3-WEN3B, or WEN-
WEN4B pin. The write current will flow to the selected
Applications
• Super combo drives
output. When SEL1 is high I
is selected. WENRB
OUT1
enables read and oscillator current when low.
The R oscillators frequency is determined by R
or
F
FREQ1
.
Pinout
R
, and its amplitude by R
or R
AMP2
FREQ2
AMP1
EL6835
(32-PIN LPP)
TOP VIEW
Ordering Information
PART
NUMBER
TEMP. RANGE
PACKAGE
PKG. DWG. #
EL6835CL
0°C to +70°C
32-Pin LPP
MDP0046
1
2
3
4
5
6
7
8
9
25
24
23
22
21
20
19
18
17
RFREQ2
GND
VDDN
IOUT1
IOUT1
GND
WENRB
WEN2
Get FULL DATASHEET
THERMAL
PAD
WEN2B
WEN3
RAMP1
RAMP2
VDDN
IOUT2
IOUT2
WEN3B
WEN4
WEN4B
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
1
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.