EL6839
®
Data Sheet
July 15, 2004
FN7227.2
PRELIMINARY
Dual 4-Channel Driver with Oscillator and
LVDS
Features
• Two channels for CD or DVD
The EL6839 is a high performance,
dual output, laser driver for writeable
DVD drives. The ENA pin enables the
• Voltage-controlled output current source requiring one
external set resistor per channel
• LVDS interface
• Rise time = 0.8ns
• Fall time = 0.8ns
• Channel 2 to 250mA max
• Channel 3 to 150mA max
• Channel 4 to 100mA max
• External 100Ω LVDS termination
• On chip oscillator with frequency and amplitude control by
use of external resistors to ground
chip, while the SEL1 pin selects the I
pin. Various
OUT
waveforms can be generated where the amplitude is
determined by the currents flowing into I , I , I , and
INR IN2 IN3
I
. The timing is determined by the signals at WEN2-
IN4
WEN2B, WEN3-WEN3B, and WEN4-WEN4B. The oscillator
is enabled when OSEN is high. The amplified I current of
INR
the selected channel is enabled when the ENA pin is high.
The total output current is the sum of the read current, the
enabled write currents, and the oscillator current when
enabled.
• Oscillator frequency to 600MHz
Usually a voltage DAC will drive a resistor that is in series
with the I
, I , I , and I
input. The resistor allows
• Oscillator amplitude to 100mA
INR IN2 IN3
IN4
P-P
the user to optimize the current gain for each channel.
• Single +5V supply (±10%)
• Chip ENAs for power savings
• Pb-free available
WEN2-WEN2B, WEN3-WEN3B and WEN4-WEN4B are
LVDS input pins with 100Ω external termination. Output write
current pulses are enabled when a high is applied to the
WEN2-WEN2B, WEN3-WEN3B, or WEN4-WEN4B pin. The
write current will flow to the selected output. When SEL1 is
Applications
• Super combo drives
• DVD drives
high I
is selected. WENRB enables read and oscillator
OUT1
current when low.
The RF oscillators frequency is determined by R
or
FREQ1
R
, and its amplitude by R
or R .
AMP2
FREQ2
AMP1
Ordering Information
PART
NUMBER
EL6839CL
TEMP. RANGE
32-Pin QFN
32-Pin QFN
32-Pin QFN
PACKAGE
PKG. DWG. #
MDP0046
MDP0046
MDP0046
MDP0046
-
7”
13”
-
EL6839CL-T7
EL6839CL-T13
Get FULL DATASHEET
EL6839CLZ
(See Note)
32-Pin QFN
(Pb-free)
EL6839CLZ-T7
(See Note)
32-Pin QFN
(Pb-free)
7”
MDP0046
MDP0046
EL6839CLZ-
T13 (See Note)
32-Pin QFN
(Pb-free)
13”
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.