DS3101
Stratum 3/3E Timing Card IC
www.maxim-ic.com
GENERAL DESCRIPTION
FEATURES
When paired with an external TCXO or OCXO, the
DS3101 is a highly integrated central timing and
synchronization solution for SONET/SDH network
elements. With 14 input clocks, the device directly
accepts both line timing from a large number of line
cards and external timing from external DS1/E1 BITS
transceivers. All input clocks are continuously monitored
for frequency accuracy and activity. Any two of the input
clocks can be selected as the references for the two
core DPLLs. The T0 DPLL complies with the Stratum 3
and 3E requirements of GR-1244, GR-253, and the
requirements of G.812 Type III and G.813. From the
output of the core DPLLs, a wide variety of output clock
frequencies and frame pulses can be produced
simultaneously on the 11 output clock pins. Two
DS3101 devices can be configured in a master/slave
arrangement for timing card equipment protection.
ꢀ
Synchronization Subsystem for Stratum 3E, 3,
4E, and 4, SMC and SEC
- Meets Requirements of GR-1244 Stratum 3/3E,
GR-253, G.812 Types I, III, and IV, and G.813
- Stratum 3E Holdover Accuracy with Suitable
External Oscillator
- Programmable Bandwidth, 0.5mHz to 70Hz
- Hitless Reference Switching on Loss of Input
- Phase Build-Out and Transient Absorption
- Locks To and Generates 125MHz for Gigabit
Synchronous Ethernet per ITU-T G.8261
14 Input Clocks
ꢀ
ꢀ
- 10 CMOS/TTL Inputs Accept 2kHz, 4kHz, and Any
Multiple of 8kHz Up to 125MHz
- Two LVDS/LVPECL/CMOS/TTL Inputs Accept
Nx8kHz Up to 125MHz Plus 155.52MHz
- Two 64kHz Composite Clock Receivers
- Continuous Input Clock Quality Monitoring
- Separate 2/4/8kHz Frame Sync Input
11 Output Clocks
The DS3101 registers and I/O pins are backward
compatible with Semtech’s ACS8520 and ACS8530
timing card ICs. The DS3101 is functionally equivalent
to a DS3100 without integrated BITS transceivers.
- Five CMOS/TTL Outputs Drive Any Internally
Produced Clock Up to 77.76MHz
- Two LVDS Outputs Each Drive Any Internally
Produced Clock Up to 311.04MHz
- One 64kHz Composite Clock Transmitter
- One 1.544MHz/2.048MHz Output Clock
- Two Sync Pulses: 8kHz and 2kHz
- Output Clock Rates Include 2kHz, 8kHz, NxDS1,
NxDS2, DS3, NxE1, E3, 6.48MHz, 19.44MHz,
38.88 MHz, 51.84MHz, 62.5MHz, 77.76MHz,
125MHz, 155.52MHz, 311.04MHz
APPLICATIONS
SONET/SDH ADMs, MSPPs, and MSSPs
Digital Cross-Connects
DSLAMs
Service Provider Routers
FUNCTIONAL DIAGRAM
ꢀ
Internal Compensation for Master Clock
Oscillator Frequency Accuracy
Processor Interface: 8-Bit Parallel or SPI Serial
1.8V Operation with 3.3V I/O (5V Tolerant)
TIMING FROM
DS3101
SONET/SDH
SYNCHRONIZATION
IC
TIMING TO
LINE CARDS AND
BITS/SSU RECEIVERS
(VARIOUS RATES)
ꢀ
ꢀ
LINE CARDS AND
BITS/SSU TRANSMITTERS
(VARIOUS RATES)
14
11
ORDERING INFORMATION
LOCAL TCXO
OR OCXO
PART
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
DS3101GN
DS3101GN+
256 CSBGA (17mm)2
256 CSBGA (17mm)2
+Denotes a lead-free package.
CONTROL STATUS
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device
may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.
1 of 149
REV: 061307