DS1035
3-in-1 High–Speed Silicon Delay Line
www.dalsemi.com
FEATURES
PIN ASSIGNMENT
ꢀ All-silicon timing circuit
8
7
VCC
1
IN1
IN2
ꢀ Three independent buffered delays
ꢀ Stable and precise over temperature and
voltage
ꢀ Leading and trailing edge precision preserves
the input symmetry
ꢀ Standard 8-pin DIP and 8-pin SOIC (150 mil)
ꢀ Vapor phasing, IR and wave solderable
ꢀ Available in Tape and Reel
OUT1
2
6
5
3
4
OUT2
OUT3
IN3
GND
DS1035M 8-Pin DIP
See Mech. Drawings Section
1
2
8
7
VCC
IN1
IN2
OUT1
OUT2
OUT3
IN3
3
4
6
5
GND
DS1035Z 8-Pin SOIC (150-mil)
See Mech. Drawings Section
PIN DESCRIPTION
IN1-IN3
OUT1-OUT3
NC
VCC
GND
- Input Signals
- Output Signals
- No Connection
- +5 Volt Supply
- Ground
(Sub)
- Internal substrate
connection, do not make
any external connections
to these pins
DESCRIPTION
The DS1035 series is a low-power +5-volt high-speed version of the popular DS1013 and complements
the DS1033 +3.3 Volt version.
The DS1035 series of delay lines have three independent logic buffered delays in a single package. The
device is Dallas Semiconductor’s fastest 3-in-1 delay line. It is available in a standard 8-pin DIP and 150
Mil 8-pin Mini-SOIC.
The device features precise leading and trailing edge accuracies. It has the inherent reliability of an all-
silicon delay line solution. The DS1035’s initial tolerance is ±1.5 or ±2.0 ns with an additional tolerance
over temperature and voltage of ±1.0 ns or ±1.5 ns, depending on the delay value. Each output is capable
of driving up to 10 LS loads.
Standard delay values are indicated in Table 1. Customers may contact Dallas Semiconductor at (982)
371-4348 for further information.
1 of 6
111799