DRV8311
SLVSFN2 – SEPTEMBER 2021
DRV8311 Three-Phase PWM Motor Driver
1 Features
3 Description
•
•
•
•
•
•
Three-phase PWM motor driver
– 3-Phase brushless DC motors
3-V to 20-V operating voltage
– 24-V Absolute maximum voltage
High output current capability
– 5-A Peak current drive
Low on-state resistance MOSFETs
– 200-mΩ typ RDS(ON) (HS + LS) at TA = 25°C
Low power sleep mode
– 1.5-µA at VVM = 12-V, TA = 25°C
Multiple control interface options
– 6x PWM control interface
The DRV8311 provides three integrated MOSFET
half-H-bridges for driving a three-phase brushless DC
(BLDC) motor for 9-V, 12-V, or 18-V DC rails or
1S to 4S battery powered applications. The device
integrates three current-sense amplifiers (CSA) with
integrated current sense for sensing the three phase
currents of BLDC motors to achieve optimum FOC
and current-control system implementation.
The DRV8311P device provides capability to generate
and configure PWM timers over Texas Instruments
SPI (tSPI), and allows the control of multiple BLDC
motors directly over the tSPI interface. This feature
reduces the number of required I/O ports from the
primary controller to control multiple motors.
– 3x PWM control interface
– PWM generation mode (SPI/tSPI) with optional
calibration between MCU and DRV8311
tSPI interface (DRV8311P)
– PWM duty and frequency update over SPI
– Control multiple DRV8311P devices using
standard 4-wire SPI interface
Supports up to 200-kHz PWM frequency
Integrated current sensing
– No external resistor required
– Sense amplifier output, one per 1/2-H
SPI and hardware device variants
– 10-MHz SPI communication (SPI/tSPI)
Supports 1.8-V, 3.3-V, and 5-V logic inputs
Built-in 3.3-V ± 4.5%, 100-mA LDO regulator
Integrated protection features
– VM undervoltage lockout (UVLO)
– Charge pump undervoltage (CPUV)
– Overcurrent protection (OCP)
Device Information(1)
•
PART NUMBER
DRV8311H
PACKAGE
BODY SIZE (NOM)
3.00 mm × 3.00 mm
3.00 mm × 3.00 mm
3.00 mm × 3.00 mm
WQFN (24)
DRV8311S(2)
WQFN (24)
WQFN (24)
DRV8311P
•
•
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
(2) Device available for preview only.
•
3- to 20-V (24-V abs max)
LDO out
3.3V up to 100mA
6x / 3x PWM
PWM input
DRV8311H/S
•
•
•
A
B
C
nSLEEP
Only on H variant
Charge Pump
SPI
Only on SPI variant
Built-in Protec on
LDO Regulator
MCU
CSA out
3x voltage feedback
nFAULT
5-A peak output current
Integrated Current Sensing
– Thermal warning and shutdown (OTW/OTSD)
– Fault condition indication pin (nFAULT)
DRV8311H/S Simplified Schematic
2 Applications
3- to 20-V (24-V abs max)
LDO out
•
•
•
•
•
•
Brushless-DC (BLDC) Motor Modules
Drones and Handheld Gimbal
Coffee Machines
Vacuum Robots
Washer and Dryer Pumps
Laptop, Desktop, and Server Fans
3.3V up to 100mA
nSLEEP
DRV8311P
A
B
C
Charge Pump
tSPI
Motor control
Built-in Protec on
LDO Regulator
MCU
CSA out
3x voltage feedback
5-A peak output current
nFAULT
Integrated Current Sensing
DRV8311P Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for preproduction products; subject to change
without notice.