DRV8313
www.ti.com
SLVSBA5A –OCTOBER 2012–REVISED NOVEMBER 2012
DRV8313 TRIPLE HALF-H-BRIDGE DRIVER IC
Check for Samples: DRV8313
1
FEATURES
DESCRIPTION
The DRV8313 provides three individually controllable
half-H-bridge drivers. It is intended to drive a three-
phase brushless dc motor, though it can also be used
to drive solenoids or other loads. Each output driver
channel consists of N-channel power MOSFETs
23
•
Three Half-H-Bridge Driver IC
–
–
–
–
Drives 3-Phase Brushless DC Motors
Individual Half-Bridge Control
Pins for Low-Side Current Sensing
Low MOSFET On-Resistance
configured in
a half-H-bridge configuration. The
design brings the ground terminals of each driver to
pins, to allow one to perform current sensing on each
output.
•
2.5-A Maximum Drive Current at 24 V, 25°C
•
Uncommitted Comparator Can Be Used for
Current Limit or Other Functions
Current-limit circuitry or other functions are possible
uses of an uncommitted comparator.
•
•
•
Built-In 3.3-V 10-mA LDO Regulator
8-V to 60-V Operating Supply Voltage Range
Thermally Enhanced Surface-Mount Package
The DRV8313 can supply up to 2.5-A peak or 1.75-A
rms output current per channel (with proper PCB
heatsinking at 24 V and 25°C) per half-H-bridge.
APPLICATIONS
The device provides internal shutdown functions for
overcurrent protection, short-circuit protection,
undervoltage lockout, and overtemperature.
•
•
•
•
•
HVAC Motors
Consumer Products
Office Automation Machines
Factory Automation
Robotics
The DRV8313 comes in
PowerPAD™ package.
a
28-pin HTSSOP
ORDERING INFORMATION(1)
ORDERABLE PART NUMBER
DRV8313PWPR
PACKAGE(2)
TOPSIDE MARKING
SHIPPING
Reel of 2000
Tube of 50
HTSSOP – PWP
DRV8313
DRV8313PWP
(1) For the most-current packaging and ordering information, see the Package Option Addendum at the end of this document, or see the TI
Web site at www.ti.com.
(2) See package drawings, thermal data, and symbolization at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated