DRV8256
SLOSE50 – DECEDMRBEVR82205260
SLOSE50 – DECEMBER 2020
www.ti.com
DRV8256E/P H-Bridge Motor Driver With Integrated Current Sense and Smart Tune
Technology
1 Features
3 Description
•
N-channel H-bridge motor driver
– Drives one bidirectional brushed-DC motor
– Two unidirectional brushed DC motors
Integrated current sensing and regulation
4.5 V to 48 V Operating supply voltage range
Multiple control interface options
– PHASE/ENABLE (PH/EN)
The DRV8256E/P devices are single H-bridge motor
drivers for a wide variety of industrial applications.
The devices integrate an N-channel H-bridge, charge
pump regulator, current sensing and regulation, and
protection circuitry.
•
•
•
Integrated current sensing allows the driver to
regulate the motor inrush current during start up and
high load events. A current limit can be set with an
adjustable external voltage reference. The integrated
current sensing uses an internal current mirror
architecture, removing the need for a large power
shunt resistor, saving board area and reducing system
cost. A low-power sleep mode is provided to achieve
ultra-low quiescent current draw by shutting down
most of the internal circuitry.
– PWM (IN/IN)
•
•
•
•
•
Smart tune, fast and mixed decay options
Low RDS(ON): 165 mΩ HS + LS at 24 V, 25°C
High Output Current Capability: 5-A peak
Limits inrush current of brushed-DC motors
Configurable Off-Time PWM Chopping
– 7, 16, 24 or 32 μs
•
•
•
•
Supports 1.8 V, 3.3 V, 5.0 V logic inputs
Low-current sleep mode (2 µA)
Spread spectrum clocking for low EMI
Protection features
– VM undervoltage lockout (UVLO)
– Charge pump undervoltage (CPUV)
– Overcurrent protection (OCP)
– Thermal shutdown (OTSD)
Internal protection features are provided for supply
undervoltage lockout (UVLO), charge pump
undervoltage (CPUV), output overcurrent (OCP), and
device overtemperature (TSD). Fault conditions are
indicated on nFAULT.
Device Information
PART NUMBER (1)
DRV8256EPWPR
DRV8256ERGER
DRV8256PPWPR
DRV8256PRGER
PACKAGE
HTSSOP (28)
VQFN (24)
BODY SIZE (NOM)
9.7mm x 4.4mm
4.0mm x 4.0mm
9.7mm x 4.4mm
4.0mm x 4.0mm
– Fault condition output (nFAULT)
HTSSOP (28)
VQFN (24)
2 Applications
•
•
•
•
•
•
Brushed DC Motors
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Printers and scanners
ATMs and Textile Machines
Major home appliances
Vacuum, humanoid, and robotics
Smart Meters
DRV8256 Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: DRV8256
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1