Document 284-1
SMT Power Inductors - DO5010H Series
•ꢀIrms ratings up to 15 A; saturation currents up to 30 A
•ꢀHeavyꢀgaugeꢀwireꢀforꢀlowꢀDCꢀresistance
Designer’s Kit C355 contains 3 of each part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over copper. Other termina-
tions available at additional cost.
Weight 3.2 – 4.0 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 250 per 13″ reel Plastic tape: 32 mm wide,
0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth
PCB washing Only pure water or alcohol recommended
1. When ordering, please specify termination and packaging codes:
DO5212H-125MLD
DCR
max
SRF
typ3
Inductance2
Isat4 Irms5
PartNumber1
±±20(µH) (mOhm) (MHz)
(A)
(A)
Termination: L
=
RoHS compliant tin-silver over copper.
DO5010H-781ML_
DO5010H-152ML_
DO5010H-222ML_
DO5010H-332ML_
DO5010H-392ML_
DO5010H-472ML_
DO5010H-602ML_
DO5010H-782ML_
DO5010H-103ML_
DO5010H-123ML_
DO5010H-153ML_
DO5010H-223ML_
DO5010H-333ML_
DO5010H-473ML_
DO5010H-683ML_
0.78
1.5
2.2
3.3
3.9
4.7
6.0
7.8
10
12
15
22
33
47
68
2.6
4.0
6.1
8.6
156
100
75
60
55
40
35
35
28
26
20
20
15
9
30
25
20
17
15
15
Special order: T = RoHS tin-silver-copper
15
12
10
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape.
10
9.0
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
14
17
18
26
28
32
47
66
86
130
13
12
11
10
8.4
7.5
7.5
6.0
5.2
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284A
LCR meter or equivalent.
3. SRF measured using Agilent/HP 8753D network analyzer.
4. DC current at which the inductance drops 10% (typ) from its value
without current.
5. Current that causes a 40°C temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
8.5
8.0
7.0
5.5
4.5
3.5
4.4
3.5
3.0
2.6
2.3
8
DO5010H-104ML_
DO5010H-154ML_
DO5010H-224ML_
DO5010H-334ML_
DO5010H-474ML_
100
150
220
330
470
190
250
380
560
850
7
6
5
4
3
3.0
2.6
2.4
1.9
1.4
1.8
1.5
1.2
1.0
0.82
DO5010H-684ML_
DO5010H-105ML_
680
1000
1100
1800
2.5
2.0
1.2
1.0
0.72
0.56
Document 284-1 Revised 10/14/08