DCMJU10 SERIES
10 Watt DC/DC Power Converters
Rev B
FEATURES
• RoHS Compliant
• 4:1 Ultra Wide Input Voltage Ranges
• Up to 10 Watts Output Power
• Single & Dual Outputs
• Remote On/Off Control
• 1500VDC I/O Isolation
• High Efficiency up to 87%
• Shielded Metal Case with Isolated Base-plate
• -40°C to +80°C Operating Temperature Range
• Over Load & Short Circuit Protection
• UL/IEC/EN 60950-1 Safety Approvals (Pending)
• Input Filter Complies to EN55032, Class A & FCC, Level A
• 1.0” x 1.0” x 0.4” Package Size • Heatsink (Optional)
DESCRIPTION
Size:
Weight:
The DCMJU10 series of DC/DC power converters offers 10 Watts of output power in a 1.0” x
1.0” x 0.4” shielded metal package with an industry standard pin-out. This series consists of
single and dual output models with a 4:1 ultra wide input voltage range and tight output voltage
regulation. State-of-the-art circuit topology provides a very high efficiency up to 87% and an
operating temperature range of -40°C to +80°C. Further features include remote on/off control,
1500VDC I/O isolation, and over load and short circuit protection. These converters are RoHS
compliant and are ideal for use in battery operated equipment, instrumentation, distributed
power architectures in communication and industrial electronics and many other space critical
applications.
1.0 x 1.0 x 0.4 inches
25.4 x 25.4 x 10.16 mm
0.53oz (15g)
Applications:
•Battery Operated Equipment
•Instrumentation
•Distributed Power Architectures
•Communication & Industrial
Electronics
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Output Current
Input Current
Output
Voltage
Output
Power
Maximum
Capacitive Load
Model Number
Input Voltage
Efficiency
Min (1)
Max
No Load
Max Load
DCMJU24S33-10
DCMJU24S05-10
DCMJU24S51-10
DCMJU24S12-10
DCMJU24S15-10
DCMJU24S24-10
DCMJU48S33-10
DCMJU48S05-10
DCMJU48S51-10
DCMJU48S12-10
DCMJU48S15-10
DCMJU48S24-10
3.3 VDC
5 VDC
330mA
300mA
300mA
125mA
100mA
62mA
2200mA
352mA
496mA
506mA
483mA
474mA
477mA
180mA
248mA
253mA
241mA
237mA
238mA
7.26W
10W
86%
84%
84%
86%
87%
86%
85%
84%
84%
86%
87%
86%
560µF
560µF
560µF
150µF
150µF
68µF
2000mA
2000mA
830mA
660mA
410mA
2200mA
2000mA
2000mA
830mA
660mA
410mA
5.1 VDC
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
10.2W
10W
24 VDC
30mA
(9 - 36 VDC)
10W
9.84W
7.26W
10W
330mA
300mA
300mA
125mA
100mA
62mA
560µF
560µF
560µF
150µF
150µF
68µF
5.1 VDC
12 VDC
15 VDC
24 VDC
10.2W
10W
48 VDC
20mA
(18 - 75 VDC)
10W
9.84W
DUAL OUTPUT MODELS
Output Current Input Current
Output
Voltage
Output
Power
Maximum
Capacitive Load
Model Number
Input Voltage
Efficiency
Min (1)
Max
No Load
Max Load
496mA
DCMJU24D05-10
DCMJU24D12-10
DCMJU24D15-10
DCMJU48D05-10
DCMJU48D12-10
DCMJU48D15-10
NOTES
±5 VDC
±12 VDC
±15 VDC
±5 VDC
±150mA
±62mA
±50mA
±150mA
±62mA
±50mA
±1000mA
10W
9.84W
10W
84%
86%
87%
84%
86%
87%
±220µF
±100µF
±100µF
±220µF
±100µF
±100µF
24 VDC
±410mA
±330mA
±1000mA
±410mA
±330mA
30mA
477mA
474mA
248mA
238mA
237mA
(9 - 36 VDC)
10W
48 VDC
±12 VDC
±15 VDC
20mA
9.84W
10W
(18 - 75 VDC)
1.The DCMJU10 series requires a minimum output loading to maintain specified regulations. Operation under no-load conditions will not
damage these devices; however they may not meet all listed specifications.
2.Transient recovery time is measured to within 1% error band for a step change in output load from 75% to 100%.
3.All DC/DC converters should be externally fused at the front end for protection.
4.To order the converter with a heatsink, please add the suffix “HS” to the model number. (Ex: DCMJU24S12-10HS)
5.Other input and output voltages may be available; please call factory for ordering details.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-
05/16/2017
9797
Page 1 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com