DBM20 Series
https://product.tdk.com/en/power/dbm
www.emea.lambda.tdk.com/dbm
24V 20A Buffer (Hold-Up) DIN Rail Module
The DBM20 20A buffer module is ideal for providing short term hold-up or peak power for loads powered by a 24Vdc output AC-DC power supply. During normal
operation, energy is stored in the DBM20’s electrolytic capacitors. When the AC power is interrupted for a short period of time, the DBM20 continues to power the load,
allowing equipment to shutdown in a safe and controlled manner. The DBM20 can be set to fixed or variable buffer mode. In fixed mode it will provide power when the
input voltage drops to 22.4V, in variable mode when the input decreases by 1V. Multiple buffer modules can be paralleled for additional hold-up time. Product status can
be accessed remotely via a DC OK relay, or locally using the LED indicators. The output voltage can also be inhibited to avoid an unsafe discharge of the stored energy.
Features
Benefits
• Provides 250ms Additional Hold-Up Time at 448W
• Utilizes Electrolytic Capacitors to Store Energy
• Narrow 49mm Width
• Avoids Loss of Data During AC Power Interruptions
• No Batteries to Service or Maintain
• Increases Available Space on the DIN Rail
• Hold-Up Time Can Be Extended
• Parallel Capable
• Output Remote On/Off Function
• Avoids Unsafe Discharge of Stored Energy
Model Selector
Output Voltage
Fixed Mode (V) (1)
Output Voltage
Dynamic Mode (V) (1)
Vin-1
Maximum
Current (A)
20
Average Buffer
Power (W)
448
Model
DBM20
DBM20/E
Terminals
Screw
Spring Clamp
22.4
22.4
Vin-1
20
448
Related Products
Type
Part Number(s)
DRM40
Description
Redundancy module
20 to 40A DIN Rail Redundancy Module
15 to 100W AC-DC DIN rail power supplies
120 to 480W AC-DC DIN rail power supplies
120 to 960W AC-DC DIN rail power supplies
3A to 30A 250Vac 2 stage filters with pulse attenuation
6A to 30A 250Vac 2 stage filters
Low power DIN rail power supplies
Mid to high power DIN rail power supplies
Mid to high power premium DIN rail power supplies
DIN rail mount filters
DRB15, 30, 50, 100
DRB120, 240, 480
DRF120, 240, 480, 960
RSMN
DIN rail mount filters
RSEV
RSEV DIN rail mounting kit
DIN-RSEV
RSEV DIN rail mounting kit
Specifications
Model
DBM20
Input
Input Voltage range
Vdc
Fixed Mode: 23 - 30, VIN-1 Mode: 24 - 30
Input Voltage Maximum Limit
Input Current (Typical)
Charging Time (Typical)
Hold Up Time (Typical)
Conducted & Radiated EMI
Immunity
Vdc
35
A
s
Charging Mode: 0.8, Ready Mode: 0.2
40
ms
-
250
EN55032-B CISPR32-B
See immunity table
-
Safety Certifications and Markings
-
IEC/UL/CSA/EN62368-1, UL508, CE Mark and UKCA Mark
1
DBM20 Series