5秒后页面跳转
DAC104S085CIMM/NOPB PDF预览

DAC104S085CIMM/NOPB

更新时间: 2024-09-20 12:51:43
品牌 Logo 应用领域
德州仪器 - TI 转换器数模转换器光电二极管
页数 文件大小 规格书
29页 1242K
描述
10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

DAC104S085CIMM/NOPB 技术参数

是否无铅:不含铅是否Rohs认证:符合
生命周期:Active零件包装代码:SSOP
包装说明:TSSOP, TSSOP10,.19,20针数:10
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:6 weeks
风险等级:1.11Is Samacsys:N
最大模拟输出电压:5.5 V最小模拟输出电压:
转换器类型:D/A CONVERTER输入位码:BINARY
输入格式:SERIALJESD-30 代码:S-PDSO-G10
JESD-609代码:e3长度:3 mm
最大线性误差 (EL):0.1953%湿度敏感等级:1
位数:10功能数量:1
端子数量:10最高工作温度:105 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:TSSOP封装等效代码:TSSOP10,.19,20
封装形状:SQUARE封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度(摄氏度):260电源:3/5 V
认证状态:Not Qualified采样速率:2.5 MHz
筛选级别:AEC-Q100座面最大高度:1.07 mm
最大稳定时间:6 µs标称安定时间 (tstl):6 µs
子类别:Other Converters最大压摆率:0.65 mA
标称供电电压:3 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Matte Tin (Sn)端子形式:GULL WING
端子节距:0.5 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:3 mm
Base Number Matches:1

DAC104S085CIMM/NOPB 数据手册

 浏览型号DAC104S085CIMM/NOPB的Datasheet PDF文件第2页浏览型号DAC104S085CIMM/NOPB的Datasheet PDF文件第3页浏览型号DAC104S085CIMM/NOPB的Datasheet PDF文件第4页浏览型号DAC104S085CIMM/NOPB的Datasheet PDF文件第5页浏览型号DAC104S085CIMM/NOPB的Datasheet PDF文件第6页浏览型号DAC104S085CIMM/NOPB的Datasheet PDF文件第7页 
DAC104S085  
www.ti.com  
SNAS362E MAY 2006REVISED OCTOBER 2012  
DAC104S085/DAC104S085-Q1 10-Bit Micro Power QUAD Digital-to-Analog Converter with  
Rail-to-Rail Output  
Check for Samples: DAC104S085  
1
FEATURES  
Power Down Modes  
AEC-Q100 Grade 1 Qualified  
2
Guaranteed Monotonicity  
APPLICATIONS  
Low Power Operation  
Battery-Powered Instruments  
Digital Gain and Offset Adjustment  
Programmable Voltage & Current Sources  
Programmable Attenuators  
Automotive  
Rail-to-Rail Voltage Output  
Power-on Reset to 0V  
Simultaneous Output Updating  
Wide power supply range (+2.7V to +5.5V)  
Industry's Smallest Package  
DESCRIPTION  
The DAC104S085 is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter  
(DAC) that can operate from a single +2.7V to 5.5V supply and consumes 1.1 mW at 3V and 2.5 mW at 5V. The  
DAC104S085 is packaged in 10-lead SON and VSSOP packages. The 10-lead SON package makes the  
DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing  
and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range.  
Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial  
interface is compatible with standard SPI, QSPI, MICROWIRE and DSP interfaces.  
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1V and VA,  
providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that  
controls the outputs to be updated, the mode of operation, the powerdown condition, and the binary input data.  
All four outputs can be updated simultaneously or individually depending on the setting of the two mode of  
operation bits.  
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a  
valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three  
different termination options.  
The low power consumption and small packages of the DAC104S085 make it an excellent choice for use in  
battery operated equipment.  
The DAC104S085 is one of a family of pin compatible DACs, including the 8-bit DAC084S085 and the 12-bit  
DAC124S085. The DAC104S085 operates over the extended industrial temperature range of 40°C to +125°C.  
Table 1. Key Specifications  
VALUE  
UNIT  
Resolution  
INL  
10  
bits  
±2  
LSB (max)  
LSB (max)  
µs (max)  
mV (max)  
%FS (max)  
mW (3V)  
mW (5V) typ  
µW (3V)  
DNL  
+0.35 / 0.25  
Settling Time  
Zero Code Error  
Full-Scale Error  
Supply Power  
6
+15  
0.75  
1.1  
2.5  
0.3  
0.8  
Normal  
Power Down  
µW (5V) typ  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
All trademarks are the property of their respective owners.  
2
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2006–2012, Texas Instruments Incorporated  

DAC104S085CIMM/NOPB 替代型号

型号 品牌 替代类型 描述 数据表
DAC104S085CIMMX TI

完全替代

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085CIMM TI

完全替代

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC084S085CIMM/NOPB TI

类似代替

具有轨到轨输出的 8 位微功耗四路数模转换器 | DGS | 10 | -40 to 10

与DAC104S085CIMM/NOPB相关器件

型号 品牌 获取价格 描述 数据表
DAC104S085CIMMX TI

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085CIMMX NSC

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085CIMMX/NOPB TI

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085CISD TI

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085CISD NSC

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085CISD/NOPB TI

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085CISDX TI

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085CISDX NSC

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085CISDX/NOPB TI

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output
DAC104S085EVAL NSC

获取价格

10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output