CYIL1SM1300AA
LUPA-1300 1.3 MPxl High Speed CMOS
Image Sensor
Main Features
The main features of the image sensor are identified as:
■ SXGA resolution: 1280 x 1024 active pixels.
■ 14 µm2 square pixels (based on the high-fill factor active pixel
sensor technology of FillFactory (US patent No. 6,225,670 and
others)).
■ Pixel rate of 40 MHz using 16 parallel outputs.
■ Random programmable windowing.
■ Dual slope integration possible.
■ 145-pin PGA package.
■ Peak QE x FF of 15%.
■ Optical format: 1,43" (17.9 mm x 14.3 mm).
■ Opticaldynamicrange:62dB(1330:1)insingleslopeoperation
and 80 to100 dB in double slope operation.
■ 16 parallel analog output amplifiers.
■ Synchronous pipelined shutter.
Preamble
■ Processing is done in a CMOS 0.50 µm triple metal process.
Overview
This document describes the interfacing and the driving of the
image sensor LUPA-1300, which is a 1280 by 1024 CMOS pixel
array working at 450 frames/sec. The sensor is an active pixel
sensor with synchronous shutter. The pixel size is 14 * 14 µm
and the sensor is designed to achieve a fame rate of 450
frames/sec at full resolution. This high frame rate can be
achieved by 16 parallel output amplifiers each working at 40 MHz
pixel rate.
The readout speed can be boosted by means of windowed
Region Of Interest (ROI) readout. High dynamic range scenes
can be captured using the double slope functionality.
The sensor uses a 3-wire Serial-Parallel Interface (SPI). It is
housed in a 145-pin ceramic PGA package.
In the following sections the different modules of the image
sensor are discussed more into detail. This data sheet allows the
user to develop a camera-system based on the described timing
and interfacing.
Ordering Information
Marketing Part Number
CYIL1SM1300AA-GDC
Description
Package
Mono with Glass
145-pin PGA
CYIL1SM1300AA-GWC
Mono without Glass
Cypress Semiconductor Corporation
Document Number: 38-05711 Rev. *D
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised September 21, 2009
[+] Feedback