CYIL1SM1300AA
Specifications
General Specifications
Table 1. General Specifications of the LUPA Sensor
Parameter
Pixel Architecture
Pixel Size
Specification
6T-pixel
Remarks
Based on the high-fill factor active pixel sensor technology of FillFactory.
14 µm x 14 μm
The resolution and pixel size results in a 17.9 mm x 14.3 mm optical active
area.
Resolution
1280 x1024
Pixel Rate
640 MHz
Using a 20 MHz system clock and 16 parallel outputs.
Full snapshot shutter with variable integration time.
Frame rate increase possible with ROI read out and/or sub sampling.
PGA pins with 0.46 mm diameter.
Shutter Type
Full Frame Rate
Package
Pipelined Snapshot Shutter
450 frames/second
Pin Grid Array 145 Pins
Electro-Optical Characteristics
Overview
Table 2. Electrical-Optical Specifications of the LUPA-1300 Sensor
Parameter Specification
<3% RMS
Remarks
FPN
<10% p/p.
PRNU
2% RMS
16 µV/electron
1V
Half saturation.
Conversion Gain
Output Signal
Amplitude
Unity gain.
Saturation Charge
62.500 e-
Is more then 60.000 (=1V/16µV/e-) due to non-linearity in saturated region.
Average white light.
1500 V.m2/W.s
8.33 V/lµx.s
21.43 V/lµx.s
50%
Sensitivity
Visible band only (180 lx = 1 W/m2).
Visible + NIR (70 lx = 1 W/m2).
Fill Factor
100%-metal and polycide coverage.
See spectral response curve.
Peak QE * FF
Peak SR * FF
15%
0.08 A/W
X: 67%
Y: 66%
At Nyquist.
MTF
Temporal Noise
S/N Ratio
45e-
Dark environment, measured at T=21 oC.
1330 = 60000:45 = 62 dB.
1330
Spectral Sensitivity
Range
400 - 1000 nm
Parasitic Light
Sensitivity
< 0.5%
i.e., sensitivity of the storage node compared to the sensitivity of photodiode.
Power Dissipation
Output Impedance
900 mWatt
Typical.
Typical.
200-300 Ω
Document Number: 38-05711 Rev. *D
Page 2 of 29
[+] Feedback