LUPA 1300-2
500 FPS High Speed CMOS Sensor
CYIL2SM1300AA
Product Brief
a wide range of operating modes and features an LVDS interface
for easy system integration. By removing the visually highly
disturbing column patterned noise, this sensor allows building a
camera without having to perform any off-line correction or the
need for any memory making this sensor highly suitable for lower
cost applications. Moreover, since the on-chip column FPN
correction is more reliable than an off-line correction as it is
intrinsically compensated for supply and temperature variations,
this sensor also allows to build reliable high-end camera's without
having to worry about column FPN appearing in environments
with highly varying ambient temperatures.
Features
■ 1280 x 1024 active pixels
■ 14 µm X 14 µm square pixels
■ 1" optical format
■ Monochrome or color digital output
■ 500 fps frame rate
■ On-chip 10-bit ADCs
The sensor requires only one master clock for operation up to 500
fps. It is housed in a 168-pin ceramic µPGA package.
■ 12 LVDS serial outputs
■ Random programmable ROI readout
■ Pipelined, Triggered and Snapshot shutter
■ On-chip column FPN correction
■ Serial to Parallel Interface (SPI)
■ Limited supplies: Nominal 2.5V (some supplies require 3.3V)
■ 0°C to 70°C operational temperature range
■ 168-pin uPGA package
The LUPA 1300-2 is available in a monochrome version or Bayer
(RGB) patterned color filter array and is available with and
without glass.
LUPA 1300-2 Die Photo
■ Power dissipation: 1.2W
Applications
■ High speed machine vision
■ Motion analysis
■ Intelligent traffic system
■ Medical imaging
■ Industrial imaging
Description
The LUPA 1300-2 is a highly integrated SXGA high speed, high
sensitivity CMOS image sensor targeted at various high speed
machine vision and industrial monitoring applications. The
sensor runs at 500fps and features triggered and pipelined
shutter modes. The sensor packs 24 parallel 10-bit A/D
converters with an aggregate conversion rate of 740 MSPS.
On-chip digital column FPN correction allows the sensor to output
ready-to-use image data for all but the most demanding
applications. In order to allow simple and reliable system
integration, the 13 channel 8 Gbps LVDS serial link protocol
supports per channel skew correction and serial link integrity
monitoring. Peak responsivity of the 14x14um 6T pixel is 7350
V.m2/W.s. Dynamic range is measured to be 57dB. In full frame
video mode, the sensor consumes 1.2W from a 2.5V power
supply. The sensors integrates A/D conversion, on-chip timing for
Ordering Information
Marketing Part Number
Mono/Color
Package
(ES Samples)
CYIL2SM1300AA-GDCES
CYIL2SM1300AA-GWCES
CYIL2SC1300AA-GDCES
CYIL2SC1300AA-GWCES
mono with glass
mono without glass
color with glass
168 pin ceramic
uPGA
color without glass
Cypress Semiconductor Corporation
Document Number: 001-49820 Rev. **
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised October 29, 2008