PSoC® 5: CY8C54 Family Datasheet
Programmable System-on-Chip (PSoC®)
General Description
With its unique array of configurable blocks, PSoC® 5 is a true system level solution providing MCU, memory, analog, and digital
peripheral functions in a single chip. The CY8C54 family offers a modern method of signal acquisition, signal processing, and control
with high accuracy, high bandwidth, and high flexibility. Analog capability spans the range from thermocouples (near DC voltages) to
ultrasonic signals. The CY8C54 family can handle dozens of data acquisition channels and analog inputs on every GPIO pin. The
CY8C54 family is also a high performance configurable digital system with some part numbers including interfaces such as USB and
multimaster I2C. In addition to communication interfaces, the CY8C54 family has an easy to configure logic array, flexible routing to
all I/O pins, and a high performance 32-bit ARM® Cortex™-M3 microprocessor core. Designers can easily create system level designs
using a rich library of prebuilt components and boolean primitives using PSoC Creator™, a hierarchical schematic design entry tool.
The CY8C54 family provides unparalleled opportunities for analog and digital bill of materials integration while easily accommodating
last minute design changes through simple firmware updates.
Library of standard peripherals
Features
32-bit ARM Cortex-M3 CPU core
DC to 67 MHz operation
Flash program memory, up to 256 KB, 100,000 write cycles,
20 year retention, and multiple security features
Up to 64 KB SRAM memory
128 bytes of cache memory
2 KB EEPROM memory, 1 million cycles, and 20 years
retention
24-channel DMA with multilayer AHB bus access
• Programmable chained descriptors and priorities
• High bandwidth 32-bit transfer support
• 8-, 16-, 24-, and 32-bit timers, counters, and PWMs
• SPI, UART, I2C
• Many others available in catalog
Library of advanced peripherals
• Cyclic redundancy check (CRC)
• Pseudo random sequence (PRS) generator
• LIN bus 2.0
• Quadrature decoder
Analog peripherals (2.7 V VDDA 5.5 V)
1.024 V ±1% internal voltage reference
Two SAR ADCs, each 12-bit at 700 ksps
Four 8-bit 5.5 Msps IDACs or 1 Msps VDACs
Four comparators with 95 ns response time
Four uncommitted opamps with 10 mA drive capability
Four configurable multifunction analog blocks. Example
configurations are PGA, TIA. Mixer and Sample and hold
CapSense support
Programming, debug, and trace
Low voltage, ultra low power
Operating voltage range: 2.7 V to 5.5 V
6 mA at 6 MHz
37 mA at 63 MHz
Low-power modes including:
• 2-µA sleep mode
• 300-nA hibernate mode with RAM retention
Serial wire debug (SWD) and single-wire viewer (SWV)
interfaces
Versatile I/O system
Cortex-M3 flash patch and breakpoint (FPB) block
Cortex-M3 data watchpoint and trace (DWT) generates data
trace information
Cortex-M3 Instrumentation Trace Macrocell (ITM) can be
used for printf-style debugging
46 to 70 I/Os (60 GPIOs, 8 SIOs, 2 USBIOs)
Any GPIO to any digital or analog peripheral routability
LCD direct drive from any GPIO, up to 46x16 segments
CapSense® support from any GPIO[1]
1.2 V to 5.5 V I/O interface voltages, up to four domains
Maskable, independent IRQ on any pin or port
Schmitt-trigger TTL inputs
All GPIOs configurable as open drain high/low,
pull-up/pull-down, High Z, or strong output
DWT and ITM blocks communicate with off-chip debug and
trace systems via the SWV interface
Bootloader programming supportable through I2C, SPI,
UART, USB, and other interfaces
Precision, programmable clocking
25 mA sink on SIO
3 to 48 MHz internal oscillator over full temperature and
voltage range
Digital peripherals
20 to 24 programmable PLD based universal digital
blocks (UDB)
Full-Speed (FS) USB 2.0 12 Mbps using a 24 MHz external
oscillator
4 to 25 MHz crystal oscillator for crystal PPM accuracy
Internal PLL clock generation up to 67 MHz
32.768 kHz watch crystal oscillator
Low-power internal oscillator at 1, 33, and 100 kHz
Four 16-bit configurable timer, counter, and PWM blocks
67 MHz, 24-bit fixed point digital filter block (DFB) to
implement FIR and IIR filters
Temperature and packaging
–40 °C to +85 °C degrees industrial temperature
68-pin QFN and 100-pin TQFP package options
Note
1. GPIOs with opamp outputs are not recommended for use with CapSense.
Cypress Semiconductor Corporation
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Document Number: 001-66238 Rev. *D
Revised February 15, 2012
5秒后页面跳转
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
AMD宣布全球裁员约1000人，调整战略聚焦增长
英伟达新AI芯片Rubin或提前半年亮相
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
