CY7C131E, CY7C131AE
CY7C136E, CY7C136AE
1 K / 2 K × 8 Dual-port Static RAM
1
K / 2 K × 8 Dual-port Static RAM
Features
Functional Description
■ True dual-ported memory cells, which allow simultaneous
reads of the same memory location
CY7C131E / CY7C131AE / CY7C136E / CY7C136AE are
high-speed, low-power CMOS 1 K / 2 K × 8 dual-port static
RAMs. Two ports are provided permitting independent access to
any location in memory. The CY7C131E / CY7C131AE /
CY7C136E / CY7C136AE can be used as a standalone dual-port
static RAM. It is the solution to applications requiring shared or
buffered data, such as cache memory for DSP, bit-slice, or multi-
processor designs.
■ 1 K / 2 K × 8 organization
■ 0.35 micron complementary metal oxide semiconductor
(CMOS) for optimum speed and power
■ High speed access: 15 ns
■ Low operating power: ICC = 110 mA (typical),
Each port has independent control pins; chip enable (CE), write
enable (R/W), and output enable (OE). Two flags are provided
on each port, BUSY and INT. The BUSY flag signals that the port
is trying to access the same location, which is currently being
accessed by the other port. The INT is an interrupt flag indicating
that data is placed in a unique location[1]. The BUSY and INT
flags are push pull outputs. An automatic power-down feature is
controlled independently on each port by the chip enable (CE)
pins.
Standby: ISB3 = 0.05 mA (typical)
■ Fully asynchronous operation
■ Automatic power-down
■ BUSY output flag to indicate access to the same location by
both ports
■ INT flag for port-to-port communication
■ Available in 52-pin plastic leaded chip carrier (PLCC), 52-pin
plastic quad flat package (PQFP)
The CY7C131E / CY7C131AE / CY7C136E / CY7C136AE are
available in 52-pin Pb-free PLCC and 52-pin Pb-free PQFP.
■ Pb-free packages available
Logic Block Diagram
R/
W
L
L
R/
W
R
CE
OE
CE
R
OE
L
R
I/O
I/O
I/O
I/O
7L
7R
I/O
CONTROL
I/O
CONTROL
0R
0L
[2]
[2]
[4]
BUSY
BUSY
R
L
A
A
A
9/10L
0L
9/10R
0R
MEMORY
ARRAY
ADDR
DECODER
ADDR
DECODER
[4]
A
7C131E/7C131AE/
ARBITRATION
7C136E/7C136AE
LOGIC
ARBITRATION LOGIC
(7C130/7C131 ONLY)
CE
L
CE
R
AND
INTERRUPT LOGIC
OE
L
OE
R
INTERRUPT LOGIC
R/
W
L
R/W
R
[3]
L
[3]
INT
INT
R
Notes
1. Unique location used by interrupt flag: 1 K × 8: Left port reads from 3FE, Right port reads from 3FF; 2 K × 8: Left port reads from 7FE, Right port reads from 7FF.
2. BUSY is a push-pull output. No pull-up resistor required.
3. INT: push-pull output. No pull-up resistor required.
4. 1 K × 8: A0–A9, 2 K × 8: A0–A10, address lines are for both left and right ports.
Cypress Semiconductor Corporation
Document Number: 001-64231 Rev. *E
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised May 15, 2013