CY62157CV30/33
512K x 16 Static RAM
significantly reduces power consumption by 80% when
addresses are not toggling. The device can also be put into
standby mode reducing power consumption by more than 99%
when deselected (CE1 HIGH or CE2 LOW or both BLE and
BHE are HIGH). The input/output pins (I/O0 through I/O15) are
placed in a high-impedance state when: deselected (CE1
HIGH or CE2 LOW), outputs are disabled (OE HIGH), both
Byte High Enable and Byte Low Enable are disabled (BHE,
BLE HIGH), or during a write operation (CE1 LOW and CE2
HIGH and WE LOW).
Features
• Temperature Ranges
— Automotive-A: –40°C to 85°C
— Automotive-E: –40°C to 125°C
• Voltage range:
— CY62157CV30: 2.7V–3.3V
— CY62157CV33: 3.0V–3.6V
• Ultra-low active power
Writing to the device is accomplished by taking Chip Enable 1
(CE1) and Write Enable (WE) inputs LOW and Chip Enable 2
(CE2) HIGH. If Byte Low Enable (BLE) is LOW, then data from
I/O pins (I/O0 through I/O7), is written into the location
specified on the address pins (A0 through A18). If Byte High
Enable (BHE) is LOW, then data from I/O pins (I/O8 through
I/O15) is written into the location specified on the address pins
(A0 through A18).
— Typical active current: 1.5 mA @ f = 1 MHz
— Typical active current: 5.5 mA @ f = fmax
• Low standby power
• Easy memory expansion with CE1, CE2 and OE features
• Automatic power-down when deselected
• CMOS for optimum speed/power
Reading from the device is accomplished by taking Chip
Enable 1 (CE1) and Output Enable (OE) LOW and Chip
Enable 2 (CE2) HIGH while forcing the Write Enable (WE)
HIGH. If Byte Low Enable (BLE) is LOW, then data from the
memory location specified by the address pins will appear on
I/O0 to I/O7. If Byte High Enable (BHE) is LOW, then data from
memory will appear on I/O8 to I/O15. See the truth table at the
back of this data sheet for a complete description of read and
write modes.
• Available in Pb-free and non Pb-free 48-ball FBGA
package
Functional Description[1]
The CY62157CV30/33 are high-performance CMOS static
RAMs organized as 512K words by 16 bits. These devices
feature advanced circuit design to provide ultra-low active
current. This is ideal for providing More Battery Life™
(MoBL™) in portable applications such as cellular telephones.
The devices also have an automatic power-down feature that
The CY62157CV30/33 are available in a 48-ball FBGA
package.
Logic Block Diagram
DATA IN DRIVERS
A
A
A
A
A
A
A
A
A
10
9
8
7
6
512K × 16
RAM Array
5
4
3
2
I/O –I/O
0
7
I/O –I/O
8
15
A
A
1
0
COLUMN DECODER
BHE
WE
CE2
CE1
OE
BLE
Power-down
Circuit
CE2
CE1
BHE
BLE
Note:
1. For best practice recommendations, please refer to the Cypress application note “System Design Guidelines” on http://www.cypress.com.
Cypress Semiconductor Corporation
Document #: 38-05014 Rev. *F
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised August 31, 2006
[+] Feedback