5秒后页面跳转
CS8818 PDF预览

CS8818

更新时间: 2024-09-10 06:49:31
品牌 Logo 应用领域
其他 - ETC 控制器
页数 文件大小 规格书
2页 111K
描述
General Purpose USB2.0-to-ATAPI Bridge Controller with Embedded PHY

CS8818 数据手册

 浏览型号CS8818的Datasheet PDF文件第2页 
CS8818  
General Purpose USB2.0-to-ATAPI Bridge Controller with  
Embedded PHY  
FEATURES  
• Firmware to support ATAPI  
CD-ROM/CD-RW/DVD-ROM/DVD-RW is  
provided  
• Fully compatible with USB specification 2.0  
- Support full-speed (12M bits/sec) or  
high-speed (480M bits/sec) devices with  
multiple configurations and multiple interfaces  
- Support all USB standard commands,  
including suspend and resume detection logic  
- Support USB 2.0 TEST mode features  
• Supports 5 endpoints  
• 12MHz external clock input to provide better  
EMI  
• Low power with operation voltage 3.3V with 5V  
tolerance I/O pads  
• Available in 64-pin LQFP (10mm x 10mm)  
production package and 128-pin QFP (14mm x  
20mm) development package  
- All endpoints share one on-chip 4K bytes SRAM  
buffer and the size of each endpoint is  
configurable  
GENERAL DESCRIPTION  
- Default control endpoints (EP0) with up to  
64-byte buffer on either TX or RX direction  
- An interrupt OUT endpoint (EP1) and an  
interrupt IN endpoint (EP2)  
The CS8818 is a single chip USB (Universal Serial Bus)  
2.0 Mass storage class peripheral controller intended for  
use with standard ATAPI devices. The device consists of  
a USB 2.0 PHY and SIE, FIFO buffers, embedded  
microprocessor with expanded external program  
ROM/Flash memory, and ATAPI compatible interface.  
- A bulk OUT endpoint (EP3) and a bulk IN  
endpoint (EP4): up to 512 bytes data payload for  
full/high speed bulk endpoint  
- Unused endpoint can be disabled  
• Embedded USB 2.0 transceiver  
- Integrated bit stuffing/unstuffing and stuff  
error detection  
The CS8818 uses 12MHz crystal to reduce the EMI  
issue. With flexible 32-bit I/O interface, the CS8818  
can be programmed to fit different situations in the  
USB 2.0 high speed mass storage class applications  
such as CD-ROM, CD-RW, DVD-R and DVD-RW, etc.  
- NRZI (Non-Return-to-Zero Inverted)  
encoding/decoding  
• USB Mass Storage Class Bulk-Only  
Specification Compliant (Version 1.0)  
• Support Bus Powered and Self Powered modes  
• Support multiple LUNs  
• Automatic detection of Master or Slave ATAPI  
devices  
• Support true ATAPI compatible interface  
- Complies with ATAPI-7 Specification (PIO  
mode 0,3,4, Multiword DMA mode 0~2,  
UDMA mode 0~6)  
- 8-bit/16-bit Standard PIO mode interface  
- 16-bit Multiword DMA mode and UDMA mode  
interface (Ultra 133)  
• ATAPI bus can be shared with other devices  
• Embedded 8-bit microprocessor with on-chip 8K  
x 14 program ROM and optional external 16K x  
14 program ROM/Flash memory  
• Flexible 32-bit I/O interfaces providing maximum  
versatility with ROM mask changeable firmware  
Myson Century, Inc.  
Taiwan:  
USA:  
4020 Moorpark Avenue, Suite 115  
sales@myson.com.tw  
No. 2, Industry East Rd. III,  
www.myson.com.tw  
Rev. 1.0 April 2003  
page 1 of 41  
Science-Based Industrial Park, Hsin-Chu, Taiwan San Jose, CA, 95117  
Tel: 886-3-5784866 Fax: 886-3-5784349  
Tel: 408-243-8388 Fax: 408-243-3188  

与CS8818相关器件

型号 品牌 获取价格 描述 数据表
CS881A1 HVPSI

获取价格

MOV Modules
CS881A2 HVPSI

获取价格

MOV Modules
CS881B1 HVPSI

获取价格

MOV Modules
CS881B2 HVPSI

获取价格

MOV Modules
CS881C1 HVPSI

获取价格

MOV Modules
CS881C2 HVPSI

获取价格

MOV Modules
CS881D1 HVPSI

获取价格

MOV Modules
CS881E1 HVPSI

获取价格

MOV Modules
CS882A1 HVPSI

获取价格

MOV Modules
CS882A2 HVPSI

获取价格

MOV Modules