CLC5957 Electrical Characteristics (V = +5V, 66MSPS; unless specified) (T = -40°C, T
= +85°C)
cc
min
max
PARAMETERS
CONDITIONS
TEMP
RATINGS
UNITS NOTES
MIN
TYP
MAX
2
POWER REQUIREMENTS
+5V supply current
Full
Full
+25°C
128
640
64
150
750
mA
mW
dB
1
1
Power dissipation
V
power supply rejection ratio
CC
Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are
determined from tested parameters.
Notes
1) These parameters are 100% tested at 25°C. Sample tested at full
temperature range.
3) See page 7, Figure 3 for ENCODE Inputs circuit.
2) Typical specifications are based on the mean test values of
deliverable converters from the first three diffusion lots.
Absolute Maximum Ratings
Recommended Operating Conditions
positive supply voltage (V
)
-0.5V to +6V
positive supply voltage (V
)
+5V ±5%
cc
cc
differential voltage between any two grounds
analog input voltage range
<100mV
analog input voltage range
2.048V diff.
pp
GND to V
operating temperature range
-40°C to +85°C
cc
digital input voltage range
-0.5V to +V
cc
output short circuit duration (one-pin to ground)
junction temperature
storage temperature range
infinite
175°C
-65°C to 150°C
10sec
Package Thermal Resistance
Package
θ
θ
JA
JC
lead solder duration (+300°C)
48-pin TSSOP
56°C/W
16°C/W
Note: Absolute maximum ratings are limiting values, to be applied individually, and
beyond which the serviceability of the circuit may be impaired. Functional
operability under any of these conditions is not necessarily implied. Exposure to
maximum ratings for extended periods may affect device reliability.
Reliability Information
Transistor count
5000
Ordering Information
Model
Temperature Range
Description
CLC5957MTD
CLC5957PCASM
-40°C to +85°C
48-pin TSSOP
Fully loaded evaluation board with CLC5957 … ready for test.
N+1
N+2
N
ANALOG
INPUT
Ta = -410ps
ENCODE
CLOCK
N
N+1
N+2
Tdv = 9.6ns
DAV
CLOCK
Tod = 10ns
DATA
OUTPUT
N-3
N-2
N-1
CLC5957 Timing Diagram
3
http://www.national.com