100W Single Output LED Power Supply
CEN-100 series
½ Features :
Features :
Universal AC input / Full range (up to 295VAC)
Protections: Short circuit / Over current / Over voltage / Over temperature
Output voltage and constant current level adjustable
Built-in active PFC function
IP66 design for indoor or outdoor installations
Cooling by free air convection
100% full load burn-in test
High reliability
Suitable for LED lighting and moving sign applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
3 years warranty
110
F
SELV
IP66
SPECIFICATION
MODEL
CEN-100-20
CEN-100-24
CEN-100-30
CEN-100-36
CEN-100-42
CEN-100-48
CEN-100-54
DC VOLTAGE
20V
24V
30V
36V
42V
48V
54V
CONSTANT CURRENT OPERATION VOLTAGE Note.5 13 ~ 20V
15.6 ~ 24V
4A
19.5 ~ 30V
3.2A
23.4 ~ 36V
2.65A
27.3 ~ 42V
2.28A
31.2 ~ 48V
2A
35.1 ~ 54V
1.77A
RATED CURRENT
CURRENT RANGE
RATED POWER
4.8A
0 ~ 4.8A
96W
0 ~ 4A
96W
0 ~ 3.2A
96W
0 ~ 2.65A
95.4W
0 ~ 2.28A
95.76W
4Vp-p
0 ~ 2A
96W
0 ~ 1.77A
95.58W
5Vp-p
RIPPLE & NOISE (max.) Note.2 2.0Vp-p
VOLTAGE ADJ. RANGE (SVR1) 17 ~ 22V
CURRENT ADJ. RANGE(SVR2) 3.12 ~ 4.8A
VOLTAGE TOLERANCE Note.3 10%
2.7Vp-p
22 ~ 27V
2.6 ~ 4A
3Vp-p
3.6Vp-p
33 ~ 40V
1.72 ~ 2.65A
4.6Vp-p
43 ~ 53V
1.3 ~ 2A
OUTPUT
27 ~ 33V
2.08 ~ 3.2A
37 ~ 46V
1.48 ~ 2.28A
49 ~ 58V
1.15 ~ 1.77A
LINE REGULATION
LOAD REGULATION
SETUP TIME
3.0%
5.0%
3000ms / 230VAC 5000ms / 115VAC at full load
Note.4 90 ~ 295VAC 127 ~ 417VDC
47 ~ 63Hz
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
INPUT
88%
89%
90%
90%
90%
91%
91%
1.4A/115VAC 0.7A/230VAC
60A/230VAC
<0.75mA / 240VAC
95 ~ 110%
OVER CURRENT
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT
OVER VOLTAGE
22.8 ~ 26V
Protection type : Shut down o/p voltage, re-power on to recover
100 10 (RTH1)
28 ~ 32V
34 ~ 38V
41 ~ 46V
47 ~ 52V
54 ~ 60V
59 ~ 65V
PROTECTION
OVER TEMPERATURE
Protection type : Shut down o/p voltage, re-power on to recover
-30 ~ +70 (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +80 , 10 ~ 95% RH
ENVIRONMENT
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, TUV EN61347-1, EN61347-2-13, J61347-1, J61347-2-13, IP66 approved
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
SAFETY &
EMC
I/P-O/P, I/P-FG, O/P-FG: >100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN61000-3-2 Class C ( 65% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), criteria A
EMC IMMUNITY
MTBF
519.5Khrs min. MIL-HDBK-217F (25
193*62.5*40.5mm (L*W*H)
)
OTHERS
NOTE
DIMENSION
0.6Kg; 24pcs/15.4Kg/1.11CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. Constant current operation region is within 65% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
File Name:CEN-100-SPEC 2011-07-28
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
