5秒后页面跳转
CCH600PS24 PDF预览

CCH600PS24

更新时间: 2024-09-14 12:30:19
品牌 Logo 应用领域
XPPOWER /
页数 文件大小 规格书
2页 586K
描述
400/600 Watts CCH400600 Series

CCH600PS24 数据手册

 浏览型号CCH600PS24的Datasheet PDF文件第2页 
xppower.com  
400/600 Watts  
CCH400ꢀ600 Series  
Baseplate Cooled  
High Efficiency up to 90%  
ꢀ40 °C to +70 °C Operation  
Industrial & MILꢀSTD461E EMC Compliance  
Power Fail, Inhibit, Overtemp & Current Share  
5V Standby Output  
3 Year Warranty  
Specification  
Input  
General  
Input Voltage  
Input Frequency  
Input Current  
• 90-264 VAC  
• 47-400 Hz  
• CCH400: 4.3/2.1 A typ. at 115/230 VAC,  
CCH600: 6.3/3.1 A typ. at 115/230 VAC,  
full load  
• 60 A max at 230 VAC, 25 °C cold start  
• >0.9  
Efficiency  
Isolation  
• 89% typical  
(1)  
• 3000 VAC Input to Output,  
1500 VAC Input to Ground,  
500 VDC Output to Ground  
• 30-333 kHz PFC, 51.1 kHz main and  
138 kHz standby converter  
• Power Fail, Inhibit, Current Share,  
Overtemperature Warning and 5 V Standby  
• 300 kHrs to MIL-HDBK-217F at 25 °C, GB  
Switching Frequency  
Signals  
Inrush Current  
Power Factor  
Earth Leakage Current • 0.7/1.1 mA at 115/230 VAC at 60/50 Hz  
Input Protection  
MTBF  
• Internal F10 A/250 V fuse  
Environmental  
Output  
Operating Temperature • -40 ˚C to +70 ˚C ambient. Baseplate must  
be maintained ≤+85 °C, see thermal  
Output Voltage  
Output Voltage Trim  
Initial Set Accuracy  
Minimum Load  
Start Up Delay  
Start Up Rise Time  
Hold Up Time  
• 12-48 VDC  
10%  
1% V1, 3% V2  
considerations  
Cooling  
• Baseplate, conduction cooling  
• 95% RH, non-condensing  
• No minimum load required  
• Typically 1 s  
• 50 ms typical  
Operating Humidity  
Storage Temperature • -40 ˚C to +85 ˚C  
Operating Altitude  
Shock  
• 3000 m  
• MIL-STD 810F Clause 516.5 proc 1  
• MIL-STD 810F figure 514.5C-17  
• 20 ms min  
Drift  
0.2% after 20 min warm up  
0.5% max  
1% V1, 5% V2 max  
Vibration  
Line Regulation  
Load Regulation  
Over/Undershoot  
Transient Response  
EMC & Safety  
• 1% typical  
Low Voltage PSU EMC • EN61204-3, high severity level  
• 4% max. deviation, recovery to within  
1% in 500 µs for a 50-75-50% load  
change  
• Typically 1% pk-pk V1, V2 2%,  
20 MHz bandwidth  
Emissions  
• EN55022 level B conducted, level A  
radiated, MIL-STD 461D-F, CE102  
Harmonic Currents  
Voltage Flicker  
Radiated Immunity  
EFT/Burst  
• EN61000-3-2, class A  
• EN61000-3-3  
• EN61000-4-3, level 3 Perf Criteria A  
• EN61000-4-4, level 3 Perf Criteria A  
Ripple & Noise  
Overvoltage Protection • 110-140% Vnom, recycle input to reset  
Overload Protection • 105-140% V1 only  
Short Circuit Protection • Continuous, approximately constant  
Surge  
• EN61000-4-5, installation class 3  
Perf Criteria A  
current  
• 0.05%/˚C  
Conducted Immunity  
Dips & Interruptions  
Safety Approvals  
• EN61000-4-6, level 3 Perf Criteria A,  
MIL-STD 461 CS114  
• EN61000-4-11, 30% 10 ms, 60% 100 ms,  
100% 5000 ms, Perf Criteria A, B, B  
• IEC60950-1 CB report, UL60950-1, TUV  
EN60950-1  
Temperature  
Coefficient  
Overtemp. Protection • Fitted  
Remote Sense  
Remote On/Off  
• Compensates for 0.5 V total voltage drop  
• Uncommitted isolated optocoupler diode,  
powered diode inhibits V1  
Equipment Protection • Class I  
Class  
Notes  
1. Safety approvals cover frequency 47-63 Hz.  

与CCH600PS24相关器件

型号 品牌 获取价格 描述 数据表
CCH600PS28 XPPOWER

获取价格

400/600 Watts CCH400600 Series
CCH600PS48 XPPOWER

获取价格

400/600 Watts CCH400600 Series
CCH62-S10 PANDUIT

获取价格

CCH-CABLE CLAMP
CCH69-S10 PANDUIT

获取价格

CCH-CABLE CLAMP
CCH74C3 LINEAGEPOWER

获取价格

75 Watt Modular Power Supply Universal AC Input Range
CCH74D3 LINEAGEPOWER

获取价格

75 Watt Modular Power Supply Universal AC Input Range
CCH74H3 LINEAGEPOWER

获取价格

75 Watt Modular Power Supply Universal AC Input Range
CCH75 LINEAGEPOWER

获取价格

75 Watt Modular Power Supply Universal AC Input Range
CCH75F1 LINEAGEPOWER

获取价格

75 Watt Modular Power Supply Universal AC Input Range
CCH75K3 LINEAGEPOWER

获取价格

75 Watt Modular Power Supply Universal AC Input Range