ECCN 5E002 TSPA - Technology / Software Publicly Available
CC430F613x
CC430F612x
CC430F513x
www.ti.com
SLAS554D –MAY 2009–REVISED JULY 2010
MSP430 SoC with RF Core
1
FEATURES
•
True System-on-Chip (SoC) for Low-Power
Wireless Communication Applications
•
High-Performance Sub-1-GHz RF Transceiver
Core
•
•
Wide Supply Voltage Range: 1.8 V to 3.6 V
Ultralow Power Consumption:
–
–
–
Same as in CC1101
Wide Supply Voltage Range: 2.0 V to 3.6 V
–
–
–
–
CPU Active Mode (AM): 160 µA/MHz
Standby Mode (LPM3 RTC Mode):2.0 µA
Off Mode (LPM4 RAM Retention): 1.0 µA
Radio in RX: 15 mA, 250 kbps, 915 MHz
Frequency Bands: 300 MHz to 348 MHz,
389 MHz to 464 MHz, and 779 MHz to
928 MHz
–
–
Programmable Data Rate From 0.6 kBaud
to 500 kBaud
•
MSP430™ System and Peripherals
High Sensitivity (–117 dBm at 0.6 kBaud,
-111 dBm at 1.2 kBaud, 315 MHz, 1% Packet
Error Rate)
–
–
–
16-Bit RISC Architecture, Extended
Memory, up to 20-MHz System Clock
Wake-Up From Standby Mode in Less
Than 6 µs
–
–
–
–
Excellent Receiver Selectivity and Blocking
Performance
Flexible Power Management System with
SVS and Brownout
Programmable Output Power Up to +12
dBm for All Supported Frequencies
–
–
Unified Clock System with FLL
2-FSK, 2-GFSK, and MSK Supported as well
as OOK and Flexible ASK Shaping
16-Bit Timer TA0, Timer_A with Five
Capture/Compare Registers
Flexible Support for Packet-Oriented
Systems: On-Chip Support for Sync Word
Detection, Address Check, Flexible Packet
Length, and Automatic CRC Handling
–
16-Bit Timer TA1, Timer_A with Three
Capture/Compare Registers
–
–
Hardware Real-Time Clock
Two Universal Serial Communication
Interfaces
–
Support for Automatic Clear Channel
Assessment (CCA) Before Transmitting (for
Listen-Before-Talk Systems)
–
–
USCI_A0 supporting UART, IrDA, SPI
USCI_B0 supporting I2C, SPI
–
–
Digital RSSI Output
Suited for Systems Targeting Compliance
With EN 300 220 (Europe) and
FCC CFR Part 15 (US)
–
12-Bit A/D Converter With Internal
Reference, Sample-and-Hold, and Autoscan
Features (Only CC430F613x and
CC430F513x)
–
–
Suited for Systems Targeting Compliance
With Wireless M-Bus Standard EN
13757-4:2005
–
–
Comparator
Integrated LCD Driver With Contrast
Control for up to 96 Segments (Only
CC430F61xx)
Support for Asynchronous and
Synchronous Serial Receive/Transmit Mode
for Backward Compatibility With Existing
Radio Communication Protocols
–
128-bit AES Security Encryption/Decryption
Coprocessor
•
•
Family Members are Summarized in Table 1.
–
–
–
32-Bit Hardware Multiplier
Three-Channel Internal DMA
For Complete Module Descriptions, See the
CC430 Family User's Guide (SLAU259).
Serial Onboard Programming, No External
Programming Voltage Needed
–
Embedded Emulation Module (EEM)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2010, Texas Instruments Incorporated