Bulletin No. DRRJ-C
Drawing No. LP0554
Released 7/03
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion-controls.com
RJ ADAPTERS & CABLES
ORDERING INFORMATION
MODEL
DRRJ
CBJ
DESCRIPTION
PART NUMBER
DRRJ11T6
DRRJ45T8
DRRJ45P6
CBJ11BD5
CBLRLC01
CBLRLC02
CBLRLC03
CBLRLC04
CBLRLC07
RJ-11/12 Connector to Terminal Adapter
RJ-45 Connector to Terminal Adapter
RJ-45 Parallel Connector
RJ-11 to RJ-11 6" Jumper Cable
RJ-12 to RJ-12 1' Cable
RJ-12 to RJ-12 10' Cable
CBL
RJ-45 to RJ-45 1' Cable
RJ-45 to RJ-45 10' Cable
RJ-45 to RJ-45 6" Jumper Cable
DRRJ11T6 and DRRJ45T8 Connector to Terminal Adapters
DESCRIPTION
APPLICATION EXAMPLES
These adapters convert modular RJ-style connectors to terminal
block connectors, providing a rugged means by which standard
shielded cabling can be used in lieu of flat, unshielded cable. The
DRRJ11T6 can be used with RJ-11 or RJ-12 cables, while the
DRRJ45T8 can be used with RJ-45 connectors. The adapters are
designed to mount on any standard DIN rail.
RS485 via RJ-11 connector and DRRJ11T6
Product Examples: DLC, IAMS, ITMS, and PAX.
Each screw-terminal accepts wire in size from 26 to 14 AWG (0.14
to 2.5 mm solid; 0.14 to 1.5 mm stranded). Terminal numbers for the
screw-terminals correspond directly to the terminal pin out of the RJ
connector. There is an extra terminal on each block labeled “S” for the
connection of shields.
A Red Lion Controls device with an RS485 RJ-11 port is connected to the
DRRJ11T6 adapter using the CBJ11BD5 cable. The terminal block is then
wired to run the RS485 MODBUS serial information to another device.
RJ-11 DIMENSIONS In inches (mm)
RS232 via RJ-12 connector and DRRJ11T6
Product Examples: G3, Modular Controller, and Paradigm (CL,
CX, GL, TX, and VX)
A Red Lion Controls device with an RS232 RJ-12 port is connected to the
DRRJ11T6 adapter using the CBLRLC01 or CBLRLC02 cable. The terminal
block is then wired to run the RS232 serial information to another device.
1