CA5260, CA5260A
®
Data Sheet
December 23, 2005
FN1929.6
3MHz, BiMOS Microprocessor Operational
Amplifiers with MOSFET Input/CMOS
Output
The CA5260A and CA5260 are integrated-circuit operational
amplifiers that combine the advantage of both CMOS and
bipolar transistors on a monolithic chip. The CA5260 series
circuits are dual versions of the popular CA5160 series. They
are designed and guaranteed to operate in microprocessor or
logic systems that use +5V supplies.
Features
• MOSFET Input Stage provides
- Very High Z . . . . . . . . . . . . . 1.5TΩ (1.5 x 10 Ω) (Typ)
- Very Low I . . . . . . . . . . . . . 5pA (Typ) at 15V Operation
12
I
I
2pA (Typ) at 5V Operation
• Ideal for Single Supply Applications
• Common Mode Input Voltage Range Includes Negative
Supply Rail; Input Terminals Can be Swung 0.5V Below
Negative Supply Rail
Gate-protected P-Channel MOSFET (PMOS) transistors are
used in the input circuit to provide very-high-input impedance,
very-low-input current, and exceptional speed performance.
The use of PMOS field-effect transistors in the input stage
results in common-mode input-voltage capability down to 0.5V
below the negative-supply terminal, an important attribute in
single-supply applications.
• CMOS Output Stage Permits Signal Swing to Either (or
Both) Supply Rails
• CA5260A, CA5260 Have Full Military Temperature Range
Guaranteed Specifications for V+ = 5V
• CA5260A, CA5260 are Guaranteed to Operate Down to
4.5V for A
OL
• Fully Guaranteed to Operate from -55°C to 125°C at
V+ = 5V, V- = GND
A complementary-symmetry MOS (CMOS) transistor-pair,
capable of swinging the output voltage to within 10mV of
either supply-voltage terminal (at very high values of load
impedance), is employed as the output circuit.
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
The CA5260 Series circuits operate at supply voltages
ranging from 4.5V to 16V, or ±2.25V to ±8V when using split
supplies.
• Ground Referenced Single Supply Amplifiers
• Fast Sample-Hold Amplifiers
• Long Duration Timers/Monostables
• Ideal Interface with Digital CMOS
• High Input Impedance Wideband Amplifiers
The CA5260, CA5260A have guaranteed specifications for 5V
operation over the full military temperature range of -55°C to
125°C.
Pinout
• Voltage Followers (e.g., Follower for Single Supply D/A
Converter)
CA5260 (SOIC)
TOP VIEW
• Voltage Regulators (Permits Control of Output Voltage
Down to 0V)
1
2
3
4
8
7
6
5
OUTPUT (A)
V+
• Wien Bridge Oscillators
• Voltage Controlled Oscillators
• Photo Diode Sensor Amplifiers
• 5V Logic Systems
A
+
INV. INPUT (A)
OUTPUT (B)
INV. INPUT (B)
NON INV. INPUT (B)
-
B
+
NON INV. INPUT (A)
-
V-
• Microprocessor Interface
Ordering Information
PART NUMBER
PART MARKING
TEMP. RANGE (°C)
-55 to 125
PACKAGE
8 Ld SOIC Tape and Reel
8 Ld SOIC
PKG. DWG. #
M8.15
CA5260AM96
5260A
5260
CA5260M
-55 to 125
M8.15
M8.15
M8.15
CA5260MZ (Note)
CA5260MZ96 (Note)
CA5260MZ
CA5260MZ
-55 to 125
8 Ld SOIC (Pb-free)
8 Ld SOIC (Pb-free)
-55 to 125
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or1-888-468-37743 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003-2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.