Layer 2 IEEE 802.3at standard (PoE+) Intelligent Giga Switch 24/16/8-Port Model
BS-POE-G2124M / BS-POE-G2116M / BS-POE-G2108M
This Web smart switch features Gigabit interfaces for all ports. This supports
VLAN, QoS, and wide variety of other functions enabling flexible network
configurations, making this an optimal switch for aggregating separate hubs.
Comes in 24-, 16-, and 8-port models.
BS-POE-G2124M
All ports feature high-output power supply Giga switches
These switches supply the power
needed to run multiple network
cameras, wireless access points,
and other devices requiring high
output power supplies, and
allows the power supply to be
managed from the PoE switches.
The units are also equipped with
Gigabit switches, an optimal choice for IEEE 802.11n and 802.11ac wireless
LAN backbones. What's more, this product eliminates the need for wiring
construction work to connect devices, with no AC adapters to plug in, either,
thereby tremendously lowering costs.
Power a variety of devices with LAN cables
Network
Camera
Wireless LAN
AC Power Supply
access point
BS-POE-G2116M
BS-POE-G2108M
PoE powered
IP phone
PD switch
"Auto Power Save NEXT" conserves electricity automatically
The energy-saving “Auto Power Save NEXT” feature automatically detects each port's link status and LAN cable length and
automatically adjusts the power output for energy savings of up to 28.8%*1. This offers enormous power savings to offices and other
locations where large numbers of computers are shut down during nighttime hours.
In addition to the energy-saving features of the original "Auto Power Save," the new "Auto Power Save NEXT" feature also supports
"Low Power Idle" mode (IEEE 802.3az Energy Efficient Ethernet)*2, helping offices save energy automatically, even during business
hours.
Automatically senses the computer's on/off status and the amount of data
*1 Figure for the BS-POE-G2124M. Maximum savings with the BS-POE-G2116M is
being transferred and automatically controls the power supplied to each ports
approximately 22.1%, with the BS-POE-G2108M approximately 14.3%.
Adjusts the power output
based on the bandwidth used
<Measurement Environment> Wattmeter: YOKOGAWA WT210, Test load device: IXIA
LSM1000MV16
*2
<Measurement Method> Data was transferred from the test load device to the switch, with
power consumption measured 1 minute after the start of the data transfer.
*2 Use of "Low Power Idle" mode requires that the function be supported by both of the
connected devices.
Ports automatically detect
whether computer is switched on
or off to control the power supply
Ample functions to manage VLAN and other features
With a VLAN, the switch divides a single network into multiple networks,
allowing each individual network to operate according to different criteria
based on usage and security levels. Plus, in addition to VLAN, the
switches feature a full compliment of functions that administrators need.
VLAN functions allow you to create multiple networks
Switch
Network 1
Network 2
(General Affairs Department)
(Sales Department)
Features
- All ports Gigabit-supported
- Jumbo Frame
- 24-, 16-, and 8-port models
- Loops indicated by flashing LEDs and buzzer
- Included hardware enables mounting in 19-inch racks
- PoE profiler function checks wasted PoE power
- Automatically distinguishes between straight and crossover
cables
- VLAN, QoS, other functions
- LEDs indicate establishment of Gigabit link
- A variety of Qos (Quality of Service) functions to control
signal priority