MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
BR3505 THRU BR3510
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
35 Amperes
FEATURES
l Low cost
BR-35
1.13( 28.8)
1.11( 28.2)
0.666( 16.9)
0.626( 15.9)
l This series is UL recognized under component
index, file number E127707
+
AC
l High forward surge current capability
l Integrally molded heatsink provide very low thermal resistance
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260oC/10 second, at 5 lbs. (2.3kg) tension.
1.13( 28.8)
1.11( 28.2)
0.728( 18.5)
0.688( 17.5)
0.666( 16.9)
0.626( 15.9)
-
AC
0.570( 14.5)
0.530( 13.5)
0.205( 5.2)
0.197( 5.0)
DIA
METAL HEAT SINK
EXOPY CASE
MECHANICAL DATA
l Case: Molded plastic body
0.442( 11.23)
0.432( 10.97)
l Terminal: Plated lead 0.25”(6.35mm) lugs.
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max.
l Weight:0.66ounce, 18.7 grams
0.512( 13.0)
0.413( 10.5)
0.033( 0.84)
0.028( 0.71)
0.252( 6.4)
0.248( 6.3)
0.252( 6.4)
0.248( 6.3)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS
UNITS
BR3505 BR351 BR352 BR354 BR356
BR358 BR3510
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
35
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
Amps
Maximum DC Blocking Voltage
100
1000
Maximum Average Forward
Rectified Output Current, at TC=50℃(Note1)
I(AV)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
400
Amps
Rating for Fusing(t<8.3ms)
Maximum Instantaneous Forward Voltage at 17.5A
I2T
VF
664
1.1
10
A2S
Volts
TA=25℃
mAmps
mAmps
Maximum DC Reverse Current at rated
DC blocking voltage
IR
1.0
TA=100℃
Isolation Voltage from case to leads
Typical Thermal Resistance (Note 1,2)
Operating Temperature Range
VISO
RqJC
TJ
2500
2.0
VAC
℃/W
℃
-55 to +150
-55 to +150
Storage Temperature Range
TSTG
℃
NOTES:
1.
2.
Unit mounted on 9”×3.5”×4.9” thick (23cm×9cm×11.8cm) Al. plate.
Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
E-mail: sales@cnmic.com Web Site: www.cnmic.com
1/2