Datasheet > BD7902CFS-E2

BD7902CFS-E2

更新时间： 2024-01-12 14:02:30

品牌	Logo	应用领域
罗姆 - ROHM		光电二极管
页数	文件大小	规格书
17页	190K
描述
Motion Control Electronic, BIPolar, PDSO54,

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

BD7902CFS-E2 技术参数

是否Rohs认证：	符合	生命周期：	Active
包装说明：	SSOP, SOP54,.53,32	Reach Compliance Code：	compliant
风险等级：	5.72	Is Samacsys：	N
JESD-30 代码：	R-PDSO-G54	端子数量：	54
最高工作温度：	85 °C	最低工作温度：	-35 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	SSOP
封装等效代码：	SOP54,.53,32	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, SHRINK PITCH	电源：	5,12 V
认证状态：	Not Qualified	子类别：	Motion Control Electronics
表面贴装：	YES	技术：	BIPOLAR
温度等级：	OTHER	端子形式：	GULL WING
端子节距：	0.8 mm	端子位置：	DUAL
Base Number Matches：	1

BD7902CFS-E2 数据手册

BD7902CFS

Optical disc ICs

4. Torque command (spindle: pin 24, sled motor: pin 28 and 29) / output current detection terminals (spindle: pin 20, sled

motor: pin 31 and 32)

The relation between the torque command input and the output current detection terminals input is expressed as

shown below:

SPRNF

SLRNF

FWD rotation

Dead zone +

Dead zone −

SPIN

SLIN1, 2

The input-output gain (gm) and the output-limit current (ILIM) depend on the resistance of RNF (output current

detection resistor). Please refer to the following expression.

The gain to drive the spindle or the sled motor can be decreased by connecting a resistor in series to each input

terminal.

Gain expression

Spindle

1.0/RNF

0.47/RNF

Sled

Input-output gain gm (A/V)

Output-limit current Ilim (A)

0.5/RNF

0.47/RNF

Gain with the added resistor gm (A/V) 15k/{SPRNF×(Rin+15k)} 0.5×47k/{SLRNF×(Rin+47k)}

Rin : added series resistor

5. PWM oscillation frequency

The PWM oscillation for driving the spindle and sled is free running. The oscillating frequency is 100kHz (typ.).

6. Muting functions

a) VC-drop muting

When the voltage at VC terminal (pin 27) drops to a value lower than 0.7V (typ.), the outputs of all the channels are

turned off. Set the VC terminal voltage to larger than 1.0V.

b) V^CC-drop muting

When the voltages at DV^CCterminal (pin 54) and VCC terminal (pin 51) drop to lower than 3.8V (typ.), the outputs of

all the channels are turned off.

c) Over voltage protection circuit

When the voltages at V^CCterminal (pin 51) drop to uper than 15.5V (typ.), the output of only the spindle block is

turned off.

7. Thermal-shutdown

A thermal-shutdown circuit (over-temperature protection circuit) is built in to prevent the IC from thermal breakdown.

Use the IC under the thermal loss allowed to the package. In case the IC is left running over the allowable loss, the

junction temperature rises, and the thermal-shutdown circuit works at the junction temperature of 175°C (typ.) (the

outputs of all the channels are turned off). When the junction temperature drops to 150°C (typ.), the IC start operating

again.

15/17

1...12 13 141516 17

中文翻译

下载PDF

与BD7902CFS-E2相关器件

型号	品牌	获取价格	描述	数据表
BD7903FS	ROHM	获取价格	5CH Power Driver for CD-ROM, DVD-ROM
BD7904FS	ROHM	获取价格	5ch Power Driver for CD-ROM, DVD-ROM
BD7905BFS	ROHM	获取价格	6CH Power Driver for CD-ROM, DVD-ROM
BD7907FS	ROHM	获取价格	6-channel Combo driver IC
BD791	MOTOROLA	获取价格	Complementary Plastic Silicon Power Transistors
BD791	ONSEMI	获取价格	POWER TRANSISTOR SILICON
BD791	NJSEMI	获取价格	Trans GP BJT NPN 100V 4A 3-Pin TO-225
BD791/D	ETC	获取价格	NPN Plastic Silicon Power Transistor
BD79104FV-LA	ROHM	获取价格	This product is a rank product for the industrial equipment market. This is the best produ
BD79104MUF-M	ROHM	获取价格	The BD79104MUF-M is a general purpose, 12bit 8-channel successive approximation A/D conver

与BD7902CFS-E2相关文章

压敏电阻器在直流电路中的过压保护应用探讨
2024-06-07

2
电感耐压值及其与电感大小的关系
2024-06-07

5
CNY17F光耦合器：特性、应用、封装、引脚功能及替换型号解析
2024-06-07

4
DS1307资料解析：特性、引脚说明、替代推荐
2024-06-07

3

产品中心

服务支持

精选活动

关于我们

帮助中心

BD7902CFS-E2

BD7902CFS-E2 技术参数

BD7902CFS-E2 数据手册

与BD7902CFS-E2相关器件

与BD7902CFS-E2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

BD7902CFS-E2

BD7902CFS-E2 技术参数

BD7902CFS-E2 数据手册

与BD7902CFS-E2相关器件

与BD7902CFS-E2相关文章

您还可以找

您在本页遇到什么问题？