Datasheet > BD3941T-E2

BD3941T-E2

更新时间： 2024-01-01 20:40:06

品牌	Logo	应用领域
罗姆 - ROHM		局域网输出元件调节器
页数	文件大小	规格书
9页	660K
描述
Fixed Positive LDO Regulator, 5V, 0.9V Dropout, ROHS COMPLIANT, TO-220, 3 PIN

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

BD3941T-E2 技术参数

生命周期：	Active	零件包装代码：	SFM
包装说明：	ROHS COMPLIANT, TO-220, 3 PIN	针数：	3
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.69
最大回动电压 1：	0.9 V	最大输入电压：	25 V
最小输入电压：	6.2 V	JESD-30 代码：	R-XSFM-T3
功能数量：	1	端子数量：	3
工作温度TJ-Max：	150 °C	最大输出电流 1：	0.2 A
最大输出电压 1：	5.1 V	最小输出电压 1：	4.8 V
标称输出电压 1：	5 V	封装主体材料：	UNSPECIFIED
封装形状：	RECTANGULAR	封装形式：	FLANGE MOUNT
认证状态：	Not Qualified	调节器类型：	FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
表面贴装：	NO	端子形式：	THROUGH-HOLE
端子位置：	SINGLE	Base Number Matches：	1

BD3941T-E2 数据手册

zOperation Notes

1) Absolute maximum ratings

An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can break down the

devices, thus making impossible to identify breaking mode, such as a short circuit or an open circuit. If any over rated values will expect

to exceed the absolute maximum ratings, consider adding circuit protection devices, such as fuses.

2) GND voltage

The potential of GND pin must be minimum potential in all operating conditions.

3) Thermal design

Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions.

4) Inter-pin shorts and mounting errors

Use caution when positioning the IC for mounting on printed circuit boards. The IC may be damaged if there is any connection error or if

pins are shorted together.

5) Actions in strong electromagnetic field

Use caution when using the IC in the presence of a strong electromagnetic field as doing so may cause the IC to malfunction.

6) Testing on application boards

When testing the IC on an application board, connecting a capacitor to a pin with low impedance subjects the IC to stress. Always

discharge capacitors after each process or step. Always turn the IC's power supply off before connecting it to or removing it from a jig or

fixture during the inspection process. Ground the IC during assembly steps as an antistatic measure. Use similar precaution when

transporting or storing the IC.

7) Regarding input pin of the IC

This monolithic IC contains P+ isolation and P substrate layers between adjacent elements in order to keep them isolated.

P-N junctions are formed at the intersection of these P layers with the N layers of other elements, creating a parasitic diode or transistor.

For example, the relation between each potential is as follows:

When GND > Pin A and GND > Pin B, the P-N junction operates as a parasitic diode.

When GND > Pin B, the P-N junction operates as a parasitic transistor.

Parasitic diodes can occur inevitable in the structure of the IC. The operation of parasitic diodes can result in mutual interference among

circuits, operational faults, or physical damage. Accordingly, methods by which parasitic diodes operate, such as applying a voltage that

is lower than the GND (P substrate) voltage to an input pin, should not be used.

Resistor

Transistor (NPN)

(PinB)

(PinA)

(PinB)

GND

P+

P substrate

GND

Parasitic elements

or transistors

Parasitic elements

GND

(PINA)

Parasitic elements

or transistors

Parasitic elements

Fig.22 Example of a Simple Monolithic IC Architecture

8) Ground Wiring Pattern

When using both small signal and large current GND patterns, it is recommended to isolate the two ground patterns, placing a single

ground point at the ground potential of application so that the pattern wiring resistance and voltage variations caused by large currents do

not cause variations in the small signal ground voltage. Be careful not to change the GND wiring pattern of any external components,

either.

6/8

1...3 4 567 8 9

中文翻译

下载PDF

与BD3941T-E2相关器件

型号	品牌	获取价格	描述	数据表
BD3950F	ROHM	获取价格	Fixed Positive LDO Regulator, 5V, PDSO8, SOP-8
BD3951F	ROHM	获取价格	System Regulator (RESET, Vcc-Detection and 150mA LDO)
BD3951F_09	ROHM	获取价格	Regulator with Voltage Detector IC
BD3985FV	ROHM	获取价格	Positive and Negative Variable Linear Regulator
BD3985FV_11	ROHM	获取价格	Silicon Monolithic Integrated Circuit
BD3987FV	ROHM	获取价格	Positive and Negative Variable Linear Regulator
BD3988FV	ROHM	获取价格	Positive and Negative Variable Linear Regulator
BD3988FV_11	ROHM	获取价格	Silicon Monolithic Integrated Circuit
BD3988FV-E1	ROHM	获取价格	Regulator, 2 Output, BIPolar, PDSO8,
BD3988FV-E2	ROHM	获取价格	Regulator, 2 Output, BIPolar, PDSO8,

与BD3941T-E2相关文章

深入解读IR2103资料手册：引脚说明、电气参数及替换型号推荐
2024-06-06

2
L7805CV手册解读：引脚说明、替代型号推荐、好坏检测
2024-06-06

2
MMBT5551资料手册解读：电气参数、替换型号推荐
2024-06-06

2
APW7073资料手册解读：产品特性、引脚说明、替换型号推荐
2024-06-06

1

产品中心

服务支持

精选活动

关于我们

帮助中心

BD3941T-E2

BD3941T-E2 技术参数

BD3941T-E2 数据手册

与BD3941T-E2相关器件

与BD3941T-E2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

BD3941T-E2

BD3941T-E2 技术参数

BD3941T-E2 数据手册

与BD3941T-E2相关器件

与BD3941T-E2相关文章

您还可以找

您在本页遇到什么问题？