Power Management IC Series for Automotive Body Control
Regulator with Voltage Detector IC
BD3951F
No.09039EAT05
●Description
BD3951F is a 5V LDO system regulator particularly developed for automotive applications. The output current of the
regulator can be drawn up to 150mA, and it has built-in power-on reset and input voltage sense. This device can withstand
50V surge input voltage as well as wide ambient temperature operations from -40℃ to +125℃. The adjustable reset delay
time and detection input voltage allow to meet with wide range of design requirements.
●Features
1) Micro processor power supply 5.0V, Adjustable Reset, Adjustable Comparator.
2) 5V is Pch DMOS type low drop out voltage regulator. Iomax=150mA.
3) Low ESR capacitor (Ceramic Capacitor) is available for the Output Capacitor.
4) Over Current Protection built in to prevent the destruction of IC.
5) Thermal Shut Down is built in to prevent the heat runaway.
6) VCC absolute Maximum Ratings 36V.
7) Vcc peak input voltage 50V (*1)
8) Small surface mount package SOP8.
●Applications
Automotive application (Rain Sensor and Cluster Panel etc.) and all other electronics application.
●Absolute Maximum Ratings (Ta=25℃)
Parameter
Vcc Input Voltage
Symbol
Vcc
Limit
-0.3~+36
-0.3~+7
-0.3~+7
-0.3~+7
0.2
Unit
V
Out Terminal Voltage
RES Terminal Voltage
SOUT Terminal Voltage
RES Output Current
Vout
Vres
Vsout
Ires
V
V
V
mA
mA
V
SOUT Output Current
SIN Input Voltage
Isout
Vsin
2.5
-0.3~+36 *3
687 *2
Power Dissipation
Pd
mV
℃
℃
V
Operating Temperature Range
Storage Temperature Range
Vcc Peak Input Voltage
Topr
-40~+125
-55~+150
50*1
Tstg
Vccpeak
*1 tr (rising time) is over 1msec, applied voltage is less than 400msec
*2 Pd is derated at 5.5mW/℃for temperature above Ta=25℃, mounted on 70mm×70mm×1.6mm PCB.
*3 Input current from Vcc to SIN PIN has to be equal and less than 5mA when Vcc voltage is less than SIN PIN voltage.
●Operating Conditions (Ta=-40℃~+125℃)
Limit
Parameter
Symbol
Unit
Min.
6.0
5.5
4
Typ.
13.5
Max.
20
36
4.7
10
-
Recommended Supply Voltage *4
Operatinal Supply Voltage *5
Vcc
Vcc
Vdet
Cct
V
V
13.5
Reset Adjustable Range
-
-
-
V
Reset Delay Time Controllable Range
Vcc Detection Adjustable Range
-
μF
V
Vcc
5
*4 The range within test condition of the electrical characteristics.
*5 The range exceeding the test condition of the electrical characteristics.
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
2009.07 - Rev.A
1/9