Datasheet > BD01

BD01

更新时间： 2023-12-06 19:52:03

品牌	Logo	应用领域
力特 - LITTELFUSE		/
页数	文件大小	规格书
2页	199K
描述
Standard Profile DIP

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

BD01 数据手册

BD Series

Standard Profile DIP Switches

Features/Benefits

Typical Applications

•

Traditional full profile DIP switch

Extended actuator for easy actuation

Open bottom construction allows for

solder washing without the need

for tape seal

•

Address switch for industrial controls

Logic switching for computers and peripherals

Function controlling for

numerous applications

•

RoHS compliant

VIBRATION: No contact opening greater than 10 microseconds and no

contact closure when exposed to vibration .06 in DA or 5g, which-

ever is less, from 10 to 55 Hz, and 10g from 55 to 500 Hz.

Specifications

SWITCH FUNCTION: SPST - 1 thru 12 position available

(except 11 position).

SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E

method 9 (1 hour steam aging).

CONTACT RATING:

PACKAGING: Switches supplied in rigid dispensing tubes in full-tube

quantities only: this may effect order quantity. Number of switches

per tube varies with model. Switch position 1 denotes pin number

1. All switch actuators in ‘OFF’ position, standard.

Carry: 100 mA max. @ 50 V DC.

Switch: 100 mA max. @ 5 V DC or 25 mA max. @ 25 V DC.

MECHANICAL AND ELECTRICAL LIFE: 10,000 make-and-break

cycles at full load, each circuit.

Materials

CASE & COVER: Glass filled polyester (PBT),

CONTACT RESISTANCE: Below 50 milliohms typ. initial

@ 2-4 V DC 100mA.

INSULATION RESISTANCE: 10 ohms min.

flame retardant (UL 94V-0).

DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between

adjacent terminals.

ACTUATOR: Glass filled nylon 6/6, flame retardant,

heat stabilized (UL 94V-0)

CAPACITANCE: 5pF max. between adjacent terminals.

STORAGE & OPERATING TEMPERATURE: -40°C to 85°C.

CONTACTS: Gold over nickel over phosphor bronze.

TERMINALS: Matte-tin over nickel over phosphor bronze.

SHOCK: Withstands 20g 11 ms sawtooth waveform with no con-

tact opening greater than 10 microseconds.

Note: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

How To Order

Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select

desired option from each category and place it in the appropriate box.

Termination

Number of Positions

01 (for Terminations NONE model only)

02-10, 12

NONE

Vertical, PC thru-hole

Right angle, PC thru-hole

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

15 Mar 22

www.ckswitches.com

H–18

中文翻译

下载PDF

与BD01相关器件

型号	品牌	获取价格	描述	数据表
BD01C	ETC	获取价格	NPN Silicon 1 Watt Amplifier Transistors
BD01D	ETC	获取价格	NPN Silicon 1 Watt Amplifier Transistors
BD02	ITT	获取价格	Standard Profile DIP Switches
BD02	CK-COMPONENTS	获取价格	Standard Profile DIP Switches
BD02	LITTELFUSE	获取价格	Standard Profile DIP
BD0205F5050A00	ANAREN	获取价格	Ultra Low Profile 1608 Balun
BD0205F5050AHF	ANAREN	获取价格	RF Transformer, 70MHz Min, 1000MHz Max, HALOGEN FREE AND ROHS COMPLIANT
BD-0-2700-9904-W	VCC	获取价格	Visible LED,
BD-0-2702-9903-W	VCC	获取价格	Visible LED,
BD-0-2702-9908-S	VCC	获取价格	Visible LED,