AZ6951
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint utilizing only 0.18 square inch
of PCB area
• Thin vertical profile only 0.25" wide
• 1 Form A contact with up to 5 Amp switching capability
• High sensitivity, 100 mW pickup
• Dielectric strength 3000 Vrms contact to coil
• Coils to 24 VDC
• Epoxy sealed for automatic wave soldering
and cleaning
• UL/CUR File E43203
CONTACTS
GENERAL DATA
Arrangement
Ratings
SPST- N.O. (1 Form A)
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
20 million operations
1 X 105 at 5 A, 30 VDC or 250 VAC Res.
Max. switched power: 150 W or 1250 VA
Max. switched current: 5 A
Operate Time (typical) 6 ms at nominal coil voltage
Max. switched voltage: 30 VDC or 250 VAC
5 A at 30 VDC resistive
5 A at 250 VAC resistive
Release Time (typical) 3 ms at nominal coil voltage
UL Ratings
Material
(with no coil suppression)
Dielectric Strength
750 Vrms between open contacts
Options:
Silver tin oxide
(at sea level for 1 min.) 3000 Vrms contact to coil
Insulation
1000 megohms min. at 20°C, 500 VDC,
Silver tin oxide with gold plating
Resistance
50% RH
Resistance
< 100 milliohms initially
Dropout
Greater than 10% of nominal coil voltage
(6 V, 1 A, voltage drop method)
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
COIL
Vibration
0.062" DA at 10–55 Hz
10 g
Power
At Pickup Voltage
(typical)
100 mW
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Max. Continuous
Dissipation
550 mW at 20°C (68°F) ambient
420 mW at 40°C (104°F) ambient
Terminals
Temperature Rise
Temperature
25°C (45°F) at nominal coil voltage
Max. 105°C (221°F)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time 30 seconds
Weight 3 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
7/16/08 W