5秒后页面跳转
AZ6961-1A-5D PDF预览

AZ6961-1A-5D

更新时间: 2024-11-22 03:20:07
品牌 Logo 应用领域
赛特勒 - ZETTLER /
页数 文件大小 规格书
2页 58K
描述
10 AMP SUBMINIATURE

AZ6961-1A-5D 数据手册

 浏览型号AZ6961-1A-5D的Datasheet PDF文件第2页 
AZ6961  
10 AMP SUBMINIATURE  
POWER RELAY  
FEATURES  
High sensitivity, 120 mW pickup  
Dielectric strength 5000 Vrms  
Isolation spacing greater than 8 mm  
10 Amp switching capability  
Epoxy sealed version available  
Reinforced insulation, EN 60730-1 (VDE 0631, part 1)  
UL, CUR file E43203  
VDE file 131637  
CONTACTS  
GENERAL DATA  
Arrangement  
SPDT (1 Form C)  
SPST (1 Form A)  
Life Expectancy  
Mechanical  
Electrical  
Minimum operations  
1 x 107  
1 x 105 at 8 A 250 VAC res.  
Ratings  
Resistive load:  
Operate Time (typical) 7 ms at nominal coil voltage  
Max. switched power: 240 W or 2500 VA  
Max. switched current: 10 A  
Max. switched voltage: 240* VDC or 440 VAC  
Release Time (typical) 3 ms at nominal coil voltage  
(with no coil suppression)  
* Note: If switching voltage is greater than 30 VDC,  
special precautions must be taken.  
Please contact the factory.  
Dielectric Strength  
(at sea level for 1 min.) 1000 Vrms between open contacts  
5000 Vrms coil to contact  
Rated Load  
UL, CUR  
Insulation  
Resistance  
1000 megohms min. at 20°C, 500 VDC,  
50% RH  
10 A at 250 VAC resistive [1]  
8 A at 30 VDC / 250 VAC [1]  
8 A at 30 VDC / 250 VAC, 100k cycles [2]  
B300 Pilot Duty [1]  
Insulation  
C250  
(according to  
DIN VDE 0110,  
IEC 60664-1)  
Overvoltage category: III  
Pollution degree: 3  
Nominal voltage: 250 VAC  
R300 Pilot Duty [1]  
VDE  
8 A at 250 VAC resistive, [1], [2] and [3]  
[1] Silver cadmium oxide, [2] Silver tin oxide,  
[3] Silver nickel  
Dropout  
Greater than 10% of nominal coil voltage  
Ambient Temperature At nominal coil voltage  
Operating  
Storage  
-40°C (-40°F) to 85°C (185°F)  
-40°C (-40°F) to 105°C (221°F)  
Material  
Silver cadmium oxide, silver tin oxide  
or silver nickel, gold plating available  
Vibration  
Break Contact: 5 g at 10 …500 Hz  
Make Contact: 20 g at 10…500 Hz  
Resistance  
< 100 milliohms initially  
Shock  
10 g  
COIL  
Enclosure  
P.B.T. polyester, UL94 V-O  
Tinned copper alloy, P.C.  
270°C (518°F)  
5 seconds  
Power  
Terminals  
At Pickup Voltage  
(typical)  
120 mW  
140 mW (60 VDC coil)  
Max. Solder Temp.  
Max. Solder Time  
Max. Solvent Temp.  
Max. Continuous  
Dissipation  
1.2 W at 20°C (68°F) ambient  
Temperature Rise  
Temperature  
20°C (36°F) at nominal coil voltage  
Max. 130°C (266°F)  
80°C (176°F)  
Max. Immersion Time 30 seconds  
Weight  
8 grams  
NOTES  
Packing unit in pcs  
20 per plastic tube / 1000 per carton box  
1. All values at 20°C (68°F).  
2. Relay may pull in with less than “Must Operate” value.  
3. Specifications subject to change without notice.  
ZETTLER electronics GmbH  
Junkersstrasse 3, D-82178 Puchheim, Germany  
Tel. +49 89 800 97 0  
Fax +49 89 800 97 200  
office@ZETTLERelectronics.com  
www.ZETTLERelectronics.com  
2004-07-29  

与AZ6961-1A-5D相关器件

型号 品牌 获取价格 描述 数据表
AZ6961-1A-5DA AZETTLER

获取价格

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.044A (Coil), 5VDC (Coil), 220mW (Coil), 1
AZ6961-1A-5DE AZETTLER

获取价格

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.044A (Coil), 5VDC (Coil), 220mW (Coil), 1
AZ6961-1A-5DEA AZETTLER

获取价格

Electromechanical Relay, SPST, Latched, 11.6VDC (Coil), 10A (Contact), 240VDC (Contact), R
AZ6961-1A-60D AZETTLER

获取价格

10 AMP SUBMINIATURE POWER RELAY
AZ6961-1A-60D ZETTLER

获取价格

10 AMP SUBMINIATURE
AZ6961-1A-60DA AZETTLER

获取价格

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.005A (Coil), 60VDC (Coil), 300mW (Coil),
AZ6961-1A-60DE AZETTLER

获取价格

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.005A (Coil), 60VDC (Coil), 300mW (Coil),
AZ6961-1A-60DEA AZETTLER

获取价格

Electromechanical Relay, SPST, Latched, 122.4VDC (Coil), 10A (Contact), 240VDC (Contact),
AZ6961-1A-6D ZETTLER

获取价格

10 AMP SUBMINIATURE
AZ6961-1A-6D AZETTLER

获取价格

10 AMP SUBMINIATURE POWER RELAY