AZ6961
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
• High sensitivity, 120 mW pickup
• Dielectric strength 5000 Vrms
• Isolation spacing greater than 8 mm
• 10 Amp switching capability
• Epoxy sealed version available
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
• UL, CUR file E43203
• VDE file 131637
CONTACTS
GENERAL DATA
Arrangement
SPDT (1 Form C)
SPST (1 Form A)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 8 A 250 VAC res.
Ratings
Resistive load:
Operate Time (typical) 7 ms at nominal coil voltage
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 240* VDC or 440 VAC
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms between open contacts
5000 Vrms coil to contact
Rated Load
UL, CUR
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
10 A at 250 VAC resistive [1]
8 A at 30 VDC / 250 VAC [1]
8 A at 30 VDC / 250 VAC, 100k cycles [2]
B300 Pilot Duty [1]
Insulation
C250
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
R300 Pilot Duty [1]
VDE
8 A at 250 VAC resistive, [1], [2] and [3]
[1] Silver cadmium oxide, [2] Silver tin oxide,
[3] Silver nickel
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Material
Silver cadmium oxide, silver tin oxide
or silver nickel, gold plating available
Vibration
Break Contact: 5 g at 10 …500 Hz
Make Contact: 20 g at 10…500 Hz
Resistance
< 100 milliohms initially
Shock
10 g
COIL
Enclosure
P.B.T. polyester, UL94 V-O
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Power
Terminals
At Pickup Voltage
(typical)
120 mW
140 mW (60 VDC coil)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Continuous
Dissipation
1.2 W at 20°C (68°F) ambient
Temperature Rise
Temperature
20°C (36°F) at nominal coil voltage
Max. 130°C (266°F)
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
8 grams
NOTES
Packing unit in pcs
20 per plastic tube / 1000 per carton box
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2004-07-29