5秒后页面跳转
AZ6961 PDF预览

AZ6961

更新时间: 2024-11-22 03:20:03
品牌 Logo 应用领域
赛特勒 - ZETTLER /
页数 文件大小 规格书
2页 58K
描述
10 AMP SUBMINIATURE

AZ6961 数据手册

 浏览型号AZ6961的Datasheet PDF文件第2页 
AZ6961  
10 AMP SUBMINIATURE  
POWER RELAY  
FEATURES  
High sensitivity, 120 mW pickup  
Dielectric strength 5000 Vrms  
Isolation spacing greater than 8 mm  
10 Amp switching capability  
Epoxy sealed version available  
Reinforced insulation, EN 60730-1 (VDE 0631, part 1)  
UL, CUR file E43203  
VDE file 131637  
CONTACTS  
GENERAL DATA  
Arrangement  
SPDT (1 Form C)  
SPST (1 Form A)  
Life Expectancy  
Mechanical  
Electrical  
Minimum operations  
1 x 107  
1 x 105 at 8 A 250 VAC res.  
Ratings  
Resistive load:  
Operate Time (typical) 7 ms at nominal coil voltage  
Max. switched power: 240 W or 2500 VA  
Max. switched current: 10 A  
Max. switched voltage: 240* VDC or 440 VAC  
Release Time (typical) 3 ms at nominal coil voltage  
(with no coil suppression)  
* Note: If switching voltage is greater than 30 VDC,  
special precautions must be taken.  
Please contact the factory.  
Dielectric Strength  
(at sea level for 1 min.) 1000 Vrms between open contacts  
5000 Vrms coil to contact  
Rated Load  
UL, CUR  
Insulation  
Resistance  
1000 megohms min. at 20°C, 500 VDC,  
50% RH  
10 A at 250 VAC resistive [1]  
8 A at 30 VDC / 250 VAC [1]  
8 A at 30 VDC / 250 VAC, 100k cycles [2]  
B300 Pilot Duty [1]  
Insulation  
C250  
(according to  
DIN VDE 0110,  
IEC 60664-1)  
Overvoltage category: III  
Pollution degree: 3  
Nominal voltage: 250 VAC  
R300 Pilot Duty [1]  
VDE  
8 A at 250 VAC resistive, [1], [2] and [3]  
[1] Silver cadmium oxide, [2] Silver tin oxide,  
[3] Silver nickel  
Dropout  
Greater than 10% of nominal coil voltage  
Ambient Temperature At nominal coil voltage  
Operating  
Storage  
-40°C (-40°F) to 85°C (185°F)  
-40°C (-40°F) to 105°C (221°F)  
Material  
Silver cadmium oxide, silver tin oxide  
or silver nickel, gold plating available  
Vibration  
Break Contact: 5 g at 10 …500 Hz  
Make Contact: 20 g at 10…500 Hz  
Resistance  
< 100 milliohms initially  
Shock  
10 g  
COIL  
Enclosure  
P.B.T. polyester, UL94 V-O  
Tinned copper alloy, P.C.  
270°C (518°F)  
5 seconds  
Power  
Terminals  
At Pickup Voltage  
(typical)  
120 mW  
140 mW (60 VDC coil)  
Max. Solder Temp.  
Max. Solder Time  
Max. Solvent Temp.  
Max. Continuous  
Dissipation  
1.2 W at 20°C (68°F) ambient  
Temperature Rise  
Temperature  
20°C (36°F) at nominal coil voltage  
Max. 130°C (266°F)  
80°C (176°F)  
Max. Immersion Time 30 seconds  
Weight  
8 grams  
NOTES  
Packing unit in pcs  
20 per plastic tube / 1000 per carton box  
1. All values at 20°C (68°F).  
2. Relay may pull in with less than “Must Operate” value.  
3. Specifications subject to change without notice.  
ZETTLER electronics GmbH  
Junkersstrasse 3, D-82178 Puchheim, Germany  
Tel. +49 89 800 97 0  
Fax +49 89 800 97 200  
office@ZETTLERelectronics.com  
www.ZETTLERelectronics.com  
2004-07-29  

与AZ6961相关器件

型号 品牌 获取价格 描述 数据表
AZ6961-1A-12D AZETTLER

获取价格

10 AMP SUBMINIATURE POWER RELAY
AZ6961-1A-12D ZETTLER

获取价格

10 AMP SUBMINIATURE
AZ6961-1A-12DA AZETTLER

获取价格

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.019A (Coil), 12VDC (Coil), 228mW (Coil),
AZ6961-1A-12DE AZETTLER

获取价格

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.019A (Coil), 12VDC (Coil), 228mW (Coil),
AZ6961-1A-12DEA AZETTLER

获取价格

Electromechanical Relay, SPST, Latched, 27.2VDC (Coil), 10A (Contact), 240VDC (Contact), R
AZ6961-1A-12DF AZETTLER

获取价格

Power/Signal Relay, SPST, Momentary, 0.019A (Coil), 12VDC (Coil), 228mW (Coil), 10A (Conta
AZ6961-1A-15D ZETTLER

获取价格

10 AMP SUBMINIATURE
AZ6961-1A-24D AZETTLER

获取价格

10 AMP SUBMINIATURE POWER RELAY
AZ6961-1A-24D ZETTLER

获取价格

10 AMP SUBMINIATURE
AZ6961-1A-24DA AZETTLER

获取价格

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.01A (Coil), 24VDC (Coil), 240mW (Coil), 1