5秒后页面跳转
AZ695-12G PDF预览

AZ695-12G

更新时间: 2024-02-15 03:08:39
品牌 Logo 应用领域
AZETTLER 继电器
页数 文件大小 规格书
2页 76K
描述
SENSITIVE SUBMINIATURE RELAY

AZ695-12G 技术参数

是否Rohs认证: 符合生命周期:Not Recommended
Reach Compliance Code:compliantECCN代码:EAR99
风险等级:5.65主体宽度:6.5 mm
主体高度:12.5 mm主体长度或直径:18.1 mm
线圈工作电压(直流):8.4 V线圈功率:100 mW
线圈电阻:720 Ω最大线圈电压(直流):20.2 V
标称线圈电压:12 V线圈/输入电源类型:DC
触点(交流)最大额定功率R负载:1250VA@250VAC触点(交流)最大额定R负载:5A@250VAC
最大触点电流(交流):5 A最大触点电流(直流):5 A
触点(直流)最大额定功率R负载:150W@150VDC触点(直流)最大额定R负载:5A@150VDC
触点电阻:30 m Ω最大触点电压(交流):250 V
最大触点电压(直流):150 V触点/输出电源类型:AC/DC
线圈与触点之间的介电强度:3000 Vrms断开触点之间的介电强度:750 Vrms
电气寿命:100000 Cycle(s)末端触点材料:Silver Cadmium Oxide
输入切换控制类型:Random绝缘电阻:100000000 Ω
JESD-609代码:e3端子数量:4
工作时间:6 ms最高工作温度:70 °C
最低工作温度:-40 °CPCB 孔数:4
物理尺寸:18.1mm x 6.5mm x 12.5mm参考标准:CSA; UL
继电器动作:LATCHED继电器样式:1 FORM A
继电器功能:SPST继电器类型:POWER/SIGNAL RELAY
释放时间:3 ms密封:EPOXY
端子面层:Tin端子长度:0.0033 inch
端接类型:SOLDER重量:3 g
Base Number Matches:1

AZ695-12G 数据手册

 浏览型号AZ695-12G的Datasheet PDF文件第2页 
AZ695  
SENSITIVE  
SUBMINIATURE RELAY  
FEATURES  
Extremely small footprint utilizing only 0.18 square inch  
of PCB area  
Thin vertical profile only 0.256" wide  
1 Form A contact with up to 5 Amp switching capability  
High sensitivity, 100 mW pickup  
Dielectric strength 3000 Vrms contact to coil  
Coils to 24 VDC  
Epoxy sealed for automatic wave soldering  
and cleaning  
UL file E44211; CSA file 74461  
CONTACTS  
GENERAL DATA  
Arrangement  
Ratings  
SPST (1 Form A)  
Resistive load:  
Life Expectancy  
Mechanical  
Electrical  
Minimum operations  
20 million operations  
1 X 105 at 5 A, 30 VDC or 250 VAC Res.  
Max. switched power: 150 W or 1250 VA  
Max. switched current: 5 A  
Operate Time (typical) 6 ms at nominal coil voltage  
Max. switched voltage: 150* VDC or 250 VAC  
Inductive load (p.f. = 0.40, L/R = 7 ms)  
2 A at 250 VAC, 30 VDC  
Release Time (typical) 3 ms at nominal coil voltage  
(with no coil suppression)  
Dielectric Strength  
(at sea level for 1 min.) 3000 Vrms contact to coil  
750 Vrms between open contacts  
UL/CSA Ratings 5 A at 30 VDC resistive  
5 A at 250 VAC general use  
1/10 HP 120 VAC  
Insulation  
Resistance  
100 megohms min. at 20°C, 500 VDC,  
50% RH  
Note: If switching voltage is greater than 30 VDC, special  
precautions must be taken. Please contact the factory.  
Dropout  
Greater than 10% of nominal coil voltage  
Material  
Options:  
Silver cadmium oxide  
Silver cadmium oxide with gold plating  
Ambient Temperature At nominal coil voltage  
Operating  
Storage  
-40°C (-40°F) to 70°C (158°F)  
-40°C (-40°F) to 105°C (221°F)  
Resistance  
< 30 milliohms initially  
(6 V, 1 A, voltage drop method)  
Vibration  
0.062" DA at 1055 Hz  
10 g  
COIL  
Shock  
Power  
Enclosure  
P.B.T. polyester  
Tinned copper alloy, P.C.  
270°C (518°F)  
5 seconds  
At Pickup Voltage  
(typical)  
100 mW  
Terminals  
Max. Solder Temp.  
Max. Solder Time  
Max. Solvent Temp.  
Max. Continuous  
Dissipation  
550 mW at 20°C (68°F) ambient  
420 mW at 40°C (104°F) ambient  
Temperature Rise  
Temperature  
25°C (45°F) at nominal coil voltage  
Max. 105°C (221°F)  
80°C (176°F)  
Max. Immersion Time 30 seconds  
Weight 3 grams  
NOTES  
1. All values at 20°C (68°F).  
2. Relay may pull in with less than “Must Operate” value.  
3. Minimum permissible contact load:  
SCO contact: 100 mA at 5 VDC  
SCO contact with gold plating: 10 mA at 5 VDC  
4. Specifications subject to change without notice.  
7/12/01W  

与AZ695-12G相关器件

型号 品牌 描述 获取价格 数据表
AZ6951-5 AZETTLER SENSITIVE SUBMINIATURE RELAY

获取价格

AZ6951-5G AZETTLER Power/Signal Relay, 1 Form A, SPST, Latched, 6.5VDC (Coil), 5A (Contact), 30VDC (Contact),

获取价格

AZ6951-6 AZETTLER SENSITIVE SUBMINIATURE RELAY

获取价格

AZ6951-6G AZETTLER Power/Signal Relay, 1 Form A, SPST, Latched, 7.8VDC (Coil), 5A (Contact), 30VDC (Contact),

获取价格

AZ695-18 AZETTLER SENSITIVE SUBMINIATURE RELAY

获取价格

AZ695-18G AZETTLER SENSITIVE SUBMINIATURE RELAY

获取价格