ASM3P2274A
4x Multiplier EMI
Reduction IC
Product Description
The ASM3P2274 is a versatile Spread Spectrum Frequency
Modulator designed specifically for a wide range of clock frequencies.
It provides a 4x Spread Spectrum Modulated output from an input
clock source.
www.onsemi.com
The ASM3P2274A reduces electromagnetic interference (EMI) at
the clock source, allowing system wide reduction of EMI of all clock
dependent signals. The ASM3P2274A allows significant system cost
savings by reducing the number of circuit board layers, ferrite beads
and shielding that are traditionally required to pass EMI regulations.
The ASM3P2274A uses the most efficient and optimized
modulation profile approved by the FCC and is implemented by using
a proprietary all digital method.
The ASM3P2274A modulates the output of a single PLL in order to
“spread” the bandwidth of a synthesized clock, and more importantly,
decreases the peak amplitudes of its harmonics. This results in
significantly lower system EMI compared to the typical narrow band
signal produced by oscillators and most frequency generators.
Lowering EMI by increasing a signal’s bandwidth is called ‘spread
spectrum clock generation.’
1
TSOP−6
CASE 318G
PIN CONNECTION
1
2
3
VSS
6
5
4
PD
ASM3P2274A
XOUT
ModOUT
VDD
XIN/CLKIN
MARKING DIAGRAM
Features
• Generates a 4x EMI Optimized Clock Signal at the Output
• Integrated Loop Filter Components
• Operates with a 2.5/3.3 V Supply
• CMOS Design
Z4LAYWG
G
1
• Input Frequency Range:
♦ 12 MHz to 30 MHz for 2.5 V
♦ 12 MHz to 30 MHz for 3.3 V
Z4L = Specific Device Code
A
Y
W
G
= Assembly Location
= Year
= Work Week
• Frequency Deviation: −1.5% (Typ) @ 66 MHz Output Frequency
• Available in TSOP−6 Package
• This Device is Pb-Free and is RoHS Compliant
= Pb-Free Package
(Note: Microdot may be in either location)
Applications
The ASM3P2274A is targeted towards all portable devices like
MP3 players, MFP, LCD Panel Module and digital still cameras.
ORDERING INFORMATION
See detailed ordering and shipping information on page 6 of
this data sheet.
Table 1. KEY SPECIFICATIONS
Description
Supply Voltages
Specification
= 2.5/3.3 V
V
DD
Cycle-to-Cycle Jitter
Output Duty Cycle
360 ps (Typ)
45/55%
Modulation Rate Equation
Frequency Deviation
F /640
IN
−1.5% (Typ) @ 66 MHz Output
© Semiconductor Components Industries, LLC, 2015
1
Publication Order Number:
July, 2015 − Rev. 3
ASM3P2274/D