Datasheet > ALN1300

ALN1300

更新时间： 2024-11-07 01:16:03

品牌	Logo	应用领域
ASB		/
页数	文件大小	规格书
3页	234K
描述
Internally Matched LNA Module

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

ALN1300 数据手册

plerow^TMALN1300

Internally Matched LNA Module

Features

Description

The plerow^TMALN-series is the compactly designed surface-mount

module for the use of the LNA with or without the following gain blocks in

the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS,

PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communi-

cation terminals, CATV and so on. It has an exceptional performance of

low noise figure, high gain, high OIP3, and low bias current. The stability

factor is always kept more than unity over the application band in order

to ensure its unconditionally stable implementation to the application

system environment. The surface-mount module package including the

completed matching circuit and other components necessary just in case

allows very simple and convenient implementation onto the system

board in mass production level.

· S₂₁= 40.0 dB@1200 MHz

= 39.0 dB@1400 MHz

· NF of 0.7 dB over Frequency

· Unconditionally Stable

· Single 5 V Supply

· High OIP3@Low Current

Specifications (in Production)

Typ.@T = 25 C, V_s= 5 V, Freq. = 1300 MHz, Z_o.sys= 50 ohms

2-stage Single Type

Specifications

Typ

Parameter

Unit

Min

1200

38.5

Max

Frequency Range

Gain

MHz

1400

39.5

0.5

0.7

More Information

Gain Flatness

0.6

Noise Figure

0.75

Website: www.asb.co.kr

E-mail: sales@asb.co.kr

Output IP3

dBm

Tel: (82) 42-528-7223

Fax: (82) 42-528-7222

S11/S22

-15/-15

180

Output P1dB

dBm

sec

Switching Time ⁽³⁾

Supply Current

Supply Voltage

Impedance

160



Package Type & Size

Surface Mount Type, 13Wx13Lx3.8H

Operating temperature is -40C to +85C.

1) OIP3 is measured with two tones at an output power of +4 dBm/tone separated by 1 MHz.

2) S11/S22 (max) is the worst value within the frequency band.

3) Switching time means the time that takes for output power to get stabilized to its final level after switching DC voltage from 0 V to V_S.

Outline Drawing (Unit: mm)

Pin Number

Function

RF In

plerow

ALN1300

RF Out

ASB Inc.

Others

Ground

(Top View)

(Bottom View)

Note: 1. The number and size of ground via holes in

a circuit board is critical for thermal RF

grounding considerations.

Solder Stencil Area

2. We recommend that the ground via holes be

placed on the bottom of all ground pins for

better RF and thermal performance, as

shown in the drawing at the left side.

(Side View)

Ø 0.4 plated thru holes to ground plane

(Recommended Footprint)

1/3

www.asb.co.kr

August 2017

12 3

中文翻译

下载PDF

与ALN1300相关器件

型号	品牌	获取价格	描述	数据表
ALN1300_17	ASB	获取价格	Internally Matched LNA Module
ALN1301	ASB	获取价格	Internally Matched LNA Module
ALN1301_17	ASB	获取价格	Internally Matched LNA Module
ALN1400	ASB	获取价格	Internally Matched LNA Module
ALN1425	ASB	获取价格	Internally Matched LNA Module
ALN1465	ASB	获取价格	Internally Matched LNA Module
ALN1500	ASB	获取价格	Internally Matched LNA Module
ALN1500AT	ASB	获取价格	Internally Matched LNA Module
ALN1502AT	ASB	获取价格	Internally Matched LNA Module
ALN1502BT	ASB	获取价格	Internally Matched LNA Module