Datasheet > ALN0071WT

ALN0071WT

更新时间： 2024-09-14 01:19:07

品牌	Logo	应用领域
ASB		/
页数	文件大小	规格书
3页	216K
描述
Internally Matched LNA Module

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

ALN0071WT 数据手册

plerow^TMALN0071WT

Internally Matched LNA Module

Features

Description

The plerow^TMALN-series is the compactly designed surface-mount

module for the use of the LNA with or without the following gain blocks in

the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS,

PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communi-

cation terminals, CATV and so on. It has an exceptional performance of

low noise figure, high gain, high OIP3, and low bias current. The stability

factor is always kept more than unity over the application band in order

to ensure its unconditionally stable implementation to the application

system environment. The surface-mount module package including the

completed matching circuit and other components necessary just in case

allows very simple and convenient implementation onto the system

board in mass production level.

· S₂₁= 22.1 dB@65 MHz

= 21.9 dB@75 MHz

· NF of 0.9 dB over Frequency

· Unconditionally Stable

· Single 5 V Supply

· High OIP3 at Low Current

Specifications (in Production)

Typ.@T = 25 C, V_s= 5 V, Freq. = 70 MHz, Z_o.sys= 50 ohms

1-stage Single Type

Specifications

Parameter

Unit

Min

Typ

Max

Frequency Range

Gain

MHz

 0.1

0.9

More Information

Gain Flatness

 0.2

Noise Figure

0.95

Website: www.asb.co.kr

E-mail: sales@asb.co.kr

Output IP3 ⁽¹⁾

S11/S22 ⁽²⁾

dBm

Tel: (82) 42-528-7223

Fax: (82) 42-528-7222

-18/-10

Output P1dB

dBm

sec

Switching Time ⁽³⁾

Supply Current

Supply Voltage

Impedance



Package Type & Size

Surface Mount Type, 10Wx10Lx3.8H

Operating temperature is -40 C to +85 C.

1) OIP3 is measured with two tones at an output power of 4 dBm/tone separated by 1 MHz.

2) S11, S22(max) is the worst value within the frequency band.

3) Switching time means the time that takes for output power to get stabilized to its final level after switching DC voltage from 0 V to V_S.

Outline Drawing (Unit: mm)

Pin Number

Function

RF In

plerow

RF Out

ALN0071WT

ASB Inc.

Others

Ground

(Top View)

(Bottom View)

Note: 1. The number and size of ground via holes in

a circuit board is critical for thermal RF

grounding considerations.

Solder Stencil Area

2. We recommend that the ground via holes be

placed on the bottom of all ground pins for

better RF and thermal performance, as

shown in the drawing at the left side.

(Side View)

Ø 0.4 plated thru holes to ground plane

(Recommended Footprint)

1/3

www.asb.co.kr

August 2017

12 3

中文翻译

下载PDF

与ALN0071WT相关器件

型号	品牌	获取价格	描述	数据表
ALN0071WT_17	ASB	获取价格	Internally Matched LNA Module
ALN0098	ASB	获取价格	Internally Matched LNA Module
ALN0113	ASB	获取价格	Internally Matched LNA Module
ALN0140WT	ASB	获取价格	Internally Matched LNA Module
ALN0195AT	ASB	获取价格	Internally Matched LNA Module
ALN0196AT	ASB	获取价格	Internally Matched LNA Module
ALN0207	ASB	获取价格	Internally Matched LNA Module
ALN0223	ASB	获取价格	Internally Matched LNA Module
ALN0230	ASB	获取价格	Internally Matched LNA Module
ALN0332	ASB	获取价格	Internally Matched LNA Module