AK2710
High Speed DAC w/16-Bit Resolution at 2.5 MSPS
Features
Block Diagram
• Monolithic 16-Bit Oversampled DAC
• 16 x Oversampling, 40 MSPS Clock
• Internal low jitter PLL allows clock input
speeds of 2, 4, 8 and 16 x sample clock.
• 2.5 MHz Input Word Rate
• AC Specifications
CEN
MULTIBIT
SIGMA-DELTA
MODULATOR
DAC
+
3rd ORDER SWITCHED
CAPACITOR LPF
• 1.01 MHz Signal Passband
• Signal-to-Noise: 86 dB
• Signal-to-(Noise plus Distortion): 84 dB
• Dynamic range: 86 dB
STAGE
INTERPOLATION
FILTER
3
OUTN
OUTP
2ND ORDER
CONTINUOUS LPF
OUTPUT
BUFFER
BIT1-BIT16
• Out-of-band (up to 20 Mhz): 70 dB
• Digital Filter
STAGE
INTERPOLATION
2
AK2710
FILTER
REFP
REFN
• Passband Ripple: 0.05dB
REFERENCE
BUFFER
• Stopband Attentuation: 60dB
• Low Power Dissipation 300 mW
• Power Supply
VCOM
STAGE
INTERPOLATION
FILTER
1
• Analog Supply + 5 V
• Digital Supply + 3 V/ + 5 V
• 4 V Vpp differential glitch free output
• Edge triggered input latch for parallel data
input
BANDGAP
RBIAS
REFERENCE
PLL + MUX
SCLK
• 44 pin LQFP package
Description
The AK2710 is a 16-bit, high speed oversampled
digital-to-analog converter optimized for waveform
reconstruction applications requiring high dynamic
range. Glitches that are characteristic of Nyquist rate
DACs are avoided by use of an over-sampled, multi-
bit sigma-delta architecture. The AK2710 is
inband images eliminating the need for complex
external analog smoothing filters. Additional out-of-
band filtering is provided after the sigma-delta DAC
The on-chip reference and reference buffer amplifier
are configured for maximum accuracy and flexibility.
manufactured on an advanced submicron analog
process. High dynamic range is achieved by the use
of proprietary multi bit delta sigma techniques.
Phase-Lock-Loop clock multiplier provides the
necessary synchronized 16fs clock to support the
over-sampled DAC. An external synchronous clock
can also be used.
The AK2710 is a switched capacitor DAC, with a
nominal full scale differential output of 4 V with a
common-mode output level of 2.5V.
The AK2710 operates on a single +5 V analog supply
and +5 V/ +3 V digital supply, typically consuming
300mW. The AK2710 is available in a 44-lead LQFP
package and is specified to operate from -40 to 85C.
The on-chip interpolation filter suppresses original
PRELIMINARY