AH477/480
Single Phase Hall Effect Latch
Features
General Description
AH477/480 is the integrated Hall sensor with output
drivers designed for electrical commutation of
brush-less DC motor application. The devices are
included as follows: on-chip Hall voltage generator
for magnetic sensing; the error amplifier that
amplifies the Hall voltage; a comparator is to
provide switching hysteresis for noise rejection; the
bi-direction drivers for sinking and driving large
current load. Internal bandgap regulator is used to
provide temperature compensated bias for internal
circuits and allows a wide operating supply voltage
range. On top of that, AH480 provides auto
shutdown and auto restart function for the DC fan to
consume less power in the lock up condition.
-On-chip Hall sensor
-Bi-direction H type output drivers for single coil
-Internal bandgap regulator allows temperature
compensated operations and a wide operating
voltage range
-High output sourcing/sinking capability up to
350mA
-Operating voltage: 3.5V~20V
-Low output switching current noise
-Auto-shutdown and auto-restart provided (AH480)
-SIP-4L package for AH477; SIP-5L, MSOP-8L
packages for AH480
Applications
If a magnetic flux density larger than threshold Bop,
DO is turned to sink and DOB is turned to drive.
The output state is held until a magnetic flux density
reversal falls below Brp causing DO to be turned to
drive and DOB turned to sink.
-Single-coil Brush-less DC Fan
-Single-coil Brush-less DC Motor
AH477/480 is rated for operation over-temperature
range from -20 oC to 85 oC and voltage range from
3.5V to 20V. The devices are available in low cost
die forms or rugged SIP-4/5L and MSOP-8L.
Pin Configuration
Pin Descriptions
Front View
Front View
(1) SIP-4L(AH477)
Name
P/I/O Pin #
Description
Positive Power Supply
Output Pin
AH480
AH477
Vcc
P
O
O
P
1
2
3
4
DO
DOB
Vss
Output Pin
Ground
(2) SIP-5L(AH480)
Name
P/I/O Pin #
Description
Timing Capacitor
Positive Power Supply
Output Pin
CT
I/O
P
O
O
P
1
2
3
4
5
Vcc
DO
DOB
Vss
Output Pin
1 2 3 4
1 2 3 4 5
Ground
SIP-4L
SIP-5L
(3) MSOP-8L(AH480)
Name
Vss
CT
P/I/O Pin #
Description
Ground
P
I/O
O
1, 2
3
1
8
Timing Capacitor
Frequency Generator
Positive Power Supply
Output Pin
FG
Vcc
DO
4
2
3
4
7
6
5
P
5, 6
7
AH480
O
O
DOB
8
Output Pin
MSOP-8L
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev.0.1 Aug 9, 2004
1/9